Understanding your Škoda Yeti’s dashboard warning lights is crucial for safe driving and preventing mechanical issues. These indicators follow a universal color code: red signals urgent action, amber/yellow requires prompt attention, and green confirms system activity. Below is a detailed guide to all major warnings specific to the Yeti.
Quick Navigation
Red Warning Lights (Stop Immediately)
Brake System Alert
Low brake fluid or hydraulic failure. Park safely, check fluid levels, and contact a mechanic if unresolved.
Engine Oil Pressure
Low oil levels or system fault. Stop the engine immediately, check oil levels, and avoid driving until resolved.
Airbag System Fault
Malfunction in airbags or seatbelt tensioners. Seek professional inspection to ensure safety systems function.
Battery Charge Alert
Alternator malfunction or battery failure. Drive to a garage immediately to avoid breakdown.
Coolant Temperature Alert
Engine overheating due to low coolant. Stop driving, allow cooling, and refill coolant.
Security/Anti-Theft Alert
Immobilizer or alarm system issue. Requires professional diagnostics.
Powertrain Malfunction
Engine or drivetrain failure. Shut off the engine and seek assistance.
Hood Open
Engine hood not securely closed. Park and close it properly to avoid hazards.
Service Electric Parking Brake
Fault in parking brake system. Avoid driving until repaired.
Water in Fuel Filter
Contaminated fuel filter. Drain water or replace the filter promptly.
Ignition Switch Fault
Serious ignition system issue. Do not turn off the engine—drive to a service center immediately.
Engine Overheat Warning
Critical engine temperature rise. Stop driving immediately to prevent damage.
4WD CHECK (Red)
Persistent 4WD system fault. Have the system inspected urgently.
AEBS Warning
ABS and brake system failure. Immediate professional repair required.
Low Fuel Level (Red)
Fuel critically low. Refuel immediately to avoid engine damage.
Amber/Yellow Warning Lights (Action Required Soon)
Tire Pressure Alert
Significant pressure loss. Check tires and inflate or replace as needed.
Emission Control System
Exhaust component fault. Reduce speed and schedule inspection.
Brake Pads Worn
Front pads nearing end of life. Replace promptly to ensure braking efficiency.
Exterior Lights Fault
Defective bulb or wiring issue. Replace bulbs immediately for safety.
ESP OFF
Stability control disabled. Drive carefully and inspect the system.
DPF Alert (Diesel)
Clogged diesel particulate filter. Drive at highway speeds to regenerate.
Glow Plug Active (Diesel)
Preheating system warming up. Wait for the light to turn off before ignition.
Fuel Filter Warning
Dirty or worn fuel filter. Clean or replace it soon to maintain performance.
Door Ajar
Door or trunk not securely closed. Check and close properly before driving.
Green Warning Lights (Information Only)
Turn Signal Active
Indicators or hazards flashing. No action needed unless rapid (bulb fault).
Cruise Control Active
Speed regulation system in use. Deactivate via brake pedal or switch.
Front Fog Light
Front fog beams activated. Use in low-visibility conditions.
Headlights On
Exterior lights functioning normally. Turn off when parked.
High Beam Indicator
Full-beam headlights are on. Switch to low beams near traffic.
Lane Departure Warning
Vehicle drifting out of lane. Adjust steering to stay within markings.
Blind Spot Monitoring
Side-detection sensors active. No intervention needed.
Eco Mode
Fuel-efficient driving mode activated. No action required.
Start/Stop System
Engine temporarily off at stops to save fuel.
Parking Sensors Active
Obstacle detection system engaged. Use caution when maneuvering.
Address red warnings immediately and schedule follow-ups for amber alerts. Green lights confirm systems are operational and require no action.
Always consult your owner’s manual when warning lights appear and seek professional diagnosis for persistent warnings to maintain your Ssangyong Tivoli’s performance, safety and longevity. The vehicle’s advanced diagnostic systems provide detailed fault codes that help technicians quickly identify and resolve issues.
