Based on the gathered information, I’ll now create the comprehensive SEO-optimized article about the Mazda 5 Premacy engine oil specifications.
The Mazda 5 Premacy has been produced from 1999 to 2018 across three generations with multiple engine configurations. Using the correct oil capacity, viscosity, and type is essential for maintaining performance and longevity.
This guide lists all model years with full oil specifications and maintenance recommendations.
The vehicle was marketed as Mazda Premacy in Japan and other Asian markets, while North American and some global markets received it as the Mazda5. Both names refer to the same compact MPV platform with region-specific engine options.
Quick Navigation
2018 Mazda 5 Premacy Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 2.0L SKYACTIV-G I4 PE-VPS |
| Oil Capacity (with Filter) | 4.2 qt (4.0 L) |
| Oil Capacity (without Filter) | 3.9 qt (3.7 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 0W-20 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 22-30 lb-ft (30-40 N·m) |
| Recommended Filters | FRAM CH6607, Mobil 1 M1-110A, Mazda 1WPE-14-302A |
The 2018 Mazda 5 Premacy uses a 2.0L SKYACTIV-G engine that requires 4.2 quarts of full synthetic oil with filter replacement. Using SAE 0W-20 oil provides the right balance of protection and efficiency under normal driving conditions.
2017 Mazda 5 Premacy Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 2.0L SKYACTIV-G I4 PE-VPS |
| Oil Capacity (with Filter) | 4.2 qt (4.0 L) |
| Oil Capacity (without Filter) | 3.9 qt (3.7 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 0W-20 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 22-30 lb-ft (30-40 N·m) |
| Recommended Filters | FRAM CH6607, Mobil 1 M1-110A, Mazda 1WPE-14-302A |
The 2017 model uses the SKYACTIV-G engine requiring 4.2 quarts of 0W-20 full synthetic oil. The oil filter can be accessed through a service port in the lower shroud.
2016 Mazda 5 Premacy Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 2.0L SKYACTIV-G I4 PE-VPS |
| Oil Capacity (with Filter) | 4.2 qt (4.0 L) |
| Oil Capacity (without Filter) | 3.9 qt (3.7 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 0W-20 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 22-30 lb-ft (30-40 N·m) |
| Recommended Filters | FRAM CH6607, Mobil 1 M1-110A, Mazda 1WPE-14-302A |
The 2016 Mazda 5 Premacy requires 4.2 quarts of SAE 0W-20 full synthetic oil for optimal engine protection. SKYACTIV engines use Mazda 0W-20-MQ oil with molybdenum additives to reduce friction.
2015 Mazda 5 Premacy Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 2.0L SKYACTIV-G I4 PE-VPS |
| Oil Capacity (with Filter) | 4.2 qt (4.0 L) |
| Oil Capacity (without Filter) | 3.9 qt (3.7 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 0W-20 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 22-30 lb-ft (30-40 N·m) |
| Recommended Filters | FRAM CH6607, Mobil 1 M1-110A, Mazda 1WPE-14-302A |
The 2015 model requires 4.2 quarts of 0W-20 synthetic oil with filter. Oil level should be checked when the engine is at operating temperature for accurate readings.
2014 Mazda 5 Premacy Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 2.0L SKYACTIV-G I4 PE-VPS |
| Oil Capacity (with Filter) | 4.2 qt (4.0 L) |
| Oil Capacity (without Filter) | 3.9 qt (3.7 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 0W-20 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 22-30 lb-ft (30-40 N·m) |
| Recommended Filters | FRAM CH6607, Mobil 1 M1-110A, Mazda 1WPE-14-302A |
The 2014 Mazda 5 Premacy uses 4.2 quarts of 0W-20 full synthetic oil. The SKYACTIV engine requires thin viscosity oil due to tight internal clearances.
2013 Mazda 5 Premacy Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 2.0L SKYACTIV-G I4 PE-VPS |
| Oil Capacity (with Filter) | 4.2 qt (4.0 L) |
| Oil Capacity (without Filter) | 3.9 qt (3.7 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 0W-20 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 22-30 lb-ft (30-40 N·m) |
| Recommended Filters | FRAM CH6607, Mobil 1 M1-110A, Mazda 1WPE-14-302A |
The 2013 model year introduced the SKYACTIV engine requiring 4.2 quarts of 0W-20 synthetic oil. This engine uses a cartridge-style oil filter accessible from underneath.
2012 Mazda 5 Premacy Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 2.5L MZR I4 L5-VE |
| Oil Capacity (with Filter) | 4.5 qt (4.3 L) |
| Oil Capacity (without Filter) | 4.0 qt (3.8 L) |
| Recommended Oil Type | Synthetic Blend |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 22-30 lb-ft (30-40 N·m) |
| Recommended Filters | FRAM CH6607, Mobil 1 M1-110A, Purolator L24651 |
The 2012 Mazda 5 Premacy uses a 2.5L MZR engine requiring 4.5 quarts of 5W-20 oil. Synthetic blend or full synthetic oils are recommended for extended protection.
2011 Mazda 5 Premacy Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 2.5L MZR I4 L5-VE |
| Oil Capacity (with Filter) | 4.5 qt (4.3 L) |
| Oil Capacity (without Filter) | 4.0 qt (3.8 L) |
| Recommended Oil Type | Synthetic Blend |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 22-30 lb-ft (30-40 N·m) |
| Recommended Filters | FRAM CH6607, Mobil 1 M1-110A, Purolator L24651 |
The 2011 model requires 4.5 quarts of 5W-20 oil for the 2.5L engine. Oil filter replacement should occur with every oil change.
2010 Mazda 5 Premacy Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 2.0L MZR I4 LF-DE / 2.5L MZR I4 L5-VE |
| Oil Capacity (with Filter) | 4.3 qt (4.1 L) / 4.5 qt (4.3 L) |
| Oil Capacity (without Filter) | 3.9 qt (3.7 L) / 4.0 qt (3.8 L) |
| Recommended Oil Type | Synthetic Blend |
| Viscosity | SAE 5W-20 / SAE 5W-30 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 22-30 lb-ft (30-40 N·m) |
| Recommended Filters | FRAM CH6607, Mobil 1 M1-110A, Purolator L24651 |
The 2010 Mazda 5 Premacy offered both 2.0L and 2.5L engine options with different oil capacities. The 2.0L engine uses 4.3 quarts while the 2.5L requires 4.5 quarts with filter.
2009 Mazda 5 Premacy Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 2.0L MZR I4 LF-DE / 2.3L MZR I4 L3-VE |
| Oil Capacity (with Filter) | 4.3 qt (4.1 L) / 4.5 qt (4.3 L) |
| Oil Capacity (without Filter) | 3.9 qt (3.7 L) / 4.0 qt (3.8 L) |
| Recommended Oil Type | Synthetic Blend |
| Viscosity | SAE 5W-20 / SAE 5W-30 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 22-30 lb-ft (30-40 N·m) |
| Recommended Filters | FRAM CH6607, Mobil 1 M1-110A, Purolator L24651 |
The 2009 model uses MZR engines requiring 4.3 to 4.5 quarts depending on displacement. SAE 5W-20 viscosity provides optimal cold start protection.
2008 Mazda 5 Premacy Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 2.0L MZR I4 LF-DE / 2.3L MZR I4 L3-VE |
| Oil Capacity (with Filter) | 4.3 qt (4.1 L) / 4.5 qt (4.3 L) |
| Oil Capacity (without Filter) | 3.9 qt (3.7 L) / 4.0 qt (3.8 L) |
| Recommended Oil Type | Synthetic Blend |
| Viscosity | SAE 5W-20 / SAE 5W-30 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 22-30 lb-ft (30-40 N·m) |
| Recommended Filters | FRAM CH6607, Mobil 1 M1-110A, Purolator L24651 |
The 2008 Mazda 5 Premacy requires 4.3 quarts for the 2.0L or 4.5 quarts for the 2.3L engine. Both engines use a trochoid gear-type oil pump with force-fed lubrication.
2007 Mazda 5 Premacy Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 2.0L MZR I4 LF-DE / 2.3L MZR I4 L3-VE |
| Oil Capacity (with Filter) | 4.3 qt (4.1 L) / 4.5 qt (4.3 L) |
| Oil Capacity (without Filter) | 3.9 qt (3.7 L) / 4.0 qt (3.8 L) |
| Recommended Oil Type | Synthetic Blend |
| Viscosity | SAE 5W-20 / SAE 5W-30 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 22-30 lb-ft (30-40 N·m) |
| Recommended Filters | FRAM CH6607, Mobil 1 M1-110A, Purolator L24651 |
The 2007 model features MZR engines with 4.3 to 4.5 quarts oil capacity. The oil filter uses a full-flow paper element design.
2006 Mazda 5 Premacy Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 2.0L MZR I4 LF-DE / 2.3L MZR I4 L3-VE |
| Oil Capacity (with Filter) | 4.3 qt (4.1 L) / 4.5 qt (4.3 L) |
| Oil Capacity (without Filter) | 3.9 qt (3.7 L) / 4.0 qt (3.8 L) |
| Recommended Oil Type | Synthetic Blend |
| Viscosity | SAE 5W-20 / SAE 5W-30 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 22-30 lb-ft (30-40 N·m) |
| Recommended Filters | FRAM CH6607, Mobil 1 M1-110A, Purolator L24651 |
The 2006 Mazda 5 Premacy launched with 2.0L and 2.3L MZR engines requiring 4.3 and 4.5 quarts, respectively. SAE 5W-20 oil is recommended for all temperature ranges.
2005 Mazda 5 Premacy Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 2.0L MZR I4 LF-DE / FS-DE |
| Oil Capacity (with Filter) | 4.3 qt (4.1 L) |
| Oil Capacity (without Filter) | 3.9 qt (3.7 L) |
| Recommended Oil Type | Synthetic Blend |
| Viscosity | SAE 5W-30 / SAE 10W-30 |
| Oil Change Interval | Every 15,000 km or 12 months |
| Oil Drain Plug Torque | 22-30 lb-ft (30-40 N·m) |
| Recommended Filters | FRAM CH6607, Mobil 1 M1-110A |
The 2005 model transitioned to the second generation with 2.0L engines requiring 4.3 quarts of oil. SAE 5W-30 or 10W-30 multigrade oil is suitable for this engine.
2004 Mazda 5 Premacy Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 1.8L I4 FP-DE / 2.0L I4 FS |
| Oil Capacity (with Filter) | 3.7 qt (3.5 L) |
| Oil Capacity (without Filter) | 3.5 qt (3.3 L) |
| Recommended Oil Type | Part Synthetic |
| Viscosity | SAE 5W-30 / SAE 10W-40 |
| Oil Change Interval | Every 15,000 km or 12 months |
| Oil Drain Plug Torque | 22-28 lb-ft (30-38 N·m) |
| Recommended Filters | RIDEX 1862O0003P, FRAM equivalent |
The 2004 Mazda 5 Premacy uses first-generation engines requiring 3.7 quarts of oil with a filter. Both 1.8L and 2.0L engines have the same oil capacity.
2003 Mazda 5 Premacy Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 1.8L I4 FP-DE / 2.0L I4 FS |
| Oil Capacity (with Filter) | 3.7 qt (3.5 L) |
| Oil Capacity (without Filter) | 3.5 qt (3.3 L) |
| Recommended Oil Type | Part Synthetic |
| Viscosity | SAE 5W-30 / SAE 10W-40 |
| Oil Change Interval | Every 15,000 km or 12 months |
| Oil Drain Plug Torque | 22-28 lb-ft (30-38 N·m) |
| Recommended Filters | RIDEX 1862O0003P, FRAM equivalent |
The 2003 model requires 3.7 quarts of 5W-30 or 10W-40 oil. Part synthetic or full synthetic oil provides adequate protection.
2002 Mazda 5 Premacy Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 1.8L I4 FP-DE / 2.0L I4 FS |
| Oil Capacity (with Filter) | 3.7 qt (3.5 L) |
| Oil Capacity (without Filter) | 3.5 qt (3.3 L) |
| Recommended Oil Type | Part Synthetic |
| Viscosity | SAE 5W-30 / SAE 10W-40 |
| Oil Change Interval | Every 15,000 km or 12 months |
| Oil Drain Plug Torque | 22-28 lb-ft (30-38 N·m) |
| Recommended Filters | RIDEX 1862O0003P, FRAM equivalent |
The 2002 Mazda 5 Premacy uses 3.7 quarts of oil with API SN or SL quality ratings. ACEA A3/B4 specification oil is also acceptable.
2001 Mazda 5 Premacy Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 1.8L I4 FP-DE / 2.0L I4 FS |
| Oil Capacity (with Filter) | 3.7 qt (3.5 L) |
| Oil Capacity (without Filter) | 3.5 qt (3.3 L) |
| Recommended Oil Type | Part Synthetic |
| Viscosity | SAE 5W-30 / SAE 10W-40 |
| Oil Change Interval | Every 15,000 km or 12 months |
| Oil Drain Plug Torque | 22-28 lb-ft (30-38 N·m) |
| Recommended Filters | RIDEX 1862O0003P, FRAM equivalent |
The 2001 model requires 3.7 quarts of multigrade oil meeting API SL specifications. The FP-DE and FS engines share identical oil capacity ratings.
2000 Mazda 5 Premacy Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 1.8L I4 FP-DE / 2.0L I4 FS / 2.0L DiTD |
| Oil Capacity (with Filter) | 3.7 qt (3.5 L) / 5.0 qt (4.7 L) diesel |
| Oil Capacity (without Filter) | 3.5 qt (3.3 L) / 4.8 qt (4.5 L) diesel |
| Recommended Oil Type | Part Synthetic / Diesel Synthetic |
| Viscosity | SAE 5W-30 / SAE 5W-40 diesel |
| Oil Change Interval | Every 15,000 km or 12 months |
| Oil Drain Plug Torque | 22-28 lb-ft (30-38 N·m) |
| Recommended Filters | RIDEX 1862O0003P, FRAM equivalent |
The 2000 Mazda 5 Premacy offered gasoline and diesel engines with different oil capacities. The 2.0L DiTD diesel engine requires 5.0 quarts of oil versus 3.7 quarts for gasoline variants.
1999 Mazda 5 Premacy Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 1.8L I4 FP-DE / 2.0L I4 FS / 2.0L DiTD |
| Oil Capacity (with Filter) | 3.7 qt (3.5 L) / 5.0 qt (4.7 L) diesel |
| Oil Capacity (without Filter) | 3.5 qt (3.3 L) / 4.8 qt (4.5 L) diesel |
| Recommended Oil Type | Part Synthetic / Diesel Synthetic |
| Viscosity | SAE 5W-30 / SAE 5W-40 diesel |
| Oil Change Interval | Every 15,000 km or 12 months |
| Oil Drain Plug Torque | 22-28 lb-ft (30-38 N·m) |
| Recommended Filters | RIDEX 1862O0003P, FRAM equivalent |
The 1999 Mazda 5 Premacy launched with 1.8L and 2.0L engines requiring 3.7 quarts of oil. The diesel variant uses 5.0 quarts of 5W-40 oil meeting ACEA specifications.
Oil Maintenance and Service Tips
Engine oil should be checked regularly and changed according to manufacturer intervals. For SKYACTIV engines, check oil level when the engine is warm and the vehicle is on level ground. Wait at least 5 minutes after turning off the engine before checking the dipstick.
Oil filter replacement must occur with every oil change to ensure proper filtration. Use OEM or equivalent filters that meet manufacturer specifications. For cartridge-style filters, replace the O-ring seal each time.
Severe driving conditions require more frequent oil changes. These conditions include frequent short trips, extreme temperatures, towing, and dusty environments. Under severe conditions, reduce the oil change interval to every 5,000 miles.
Always torque the drain plug to specification to prevent leaks or thread damage. Use a new crush washer on the drain plug with each oil change. Overfilling or underfilling engine oil can cause damage.
| Driving Condition | Oil Change Interval |
|---|---|
| Normal Driving | Every 7,500 miles or 12 months |
| Severe Driving | Every 5,000 miles or 6 months |
| Track/Performance Use | Every 3,000 miles or 3 months |
Frequently Asked Questions
What kind of oil does a Mazda 5 Premacy use?
The Mazda 5 Premacy uses different oil types depending on the model year. SKYACTIV engines from 2013-2018 require full synthetic 0W-20 oil, while 2006-2012 models use 5W-20 synthetic blend or full synthetic. First generation models from 1999-2005 use 5W-30 part synthetic or full synthetic oil.
How much oil does a Mazda 5 Premacy take?
Oil capacity varies by engine size and model year. SKYACTIV 2.0L engines require 4.2 quarts with filter, MZR 2.3L and 2.5L engines need 4.5 quarts, and first generation 1.8L and 2.0L engines use 3.7 quarts. Always verify capacity for your specific engine code.
What is the recommended oil type for a Mazda 5 Premacy?
Recommended oil type depends on the engine generation. SKYACTIV engines require full synthetic 0W-20 with molybdenum additives, second generation MZR engines use synthetic blend or full synthetic 5W-20 or 5W-30, and first generation engines accept part synthetic 5W-30. Full synthetic oil provides the best protection for all engines.
What is the oil change interval for a Mazda 5 Premacy?
Standard oil change intervals are every 7,500 miles or 12 months for 2006 and newer models. First generation models specify 15,000 kilometers or 12 months. Severe driving conditions require more frequent changes every 5,000 miles. Always change the oil filter with each oil change.
Can I use 5W-30 instead of 0W-20 in SKYACTIV engines?
Using 5W-30 in SKYACTIV engines is not recommended. SKYACTIV engines have tight internal clearances designed for 0W-20 viscosity oil. Thicker oil may not provide adequate lubrication and can cause engine damage over time. Always use the manufacturer-specified viscosity.
What oil filter fits a Mazda 5 Premacy?
Common oil filters include FRAM CH6607, Mobil 1 M1-110A, and Purolator L24651. OEM Mazda filters include part numbers 1WPE-14-302A for SKYACTIV engines. These cartridge-style filters require a 65-67mm oil filter cap for removal. Always use filters meeting or exceeding OEM specifications.
Conclusion
Proper engine oil maintenance is critical for Mazda 5 Premacy reliability and performance. Use the correct oil capacity, viscosity, and type specified for your model year and engine code. SKYACTIV engines require full synthetic 0W-20, MZR engines use 5W-20, and first generation engines need 5W-30.
Always follow manufacturer-recommended oil change intervals and replace the filter with each service. Using quality oil and filters that meet OEM specifications ensures optimal engine protection and longevity. Regular maintenance prevents premature wear and maintains fuel efficiency across all model years.
