Based on the gathered information about the Mitsubishi Galant, here is a comprehensive, SEO-optimized article following the exact format specifications:
The Mitsubishi Galant was produced from 1969 to 2012 as a mid-size sedan with multiple engine configurations available throughout its production run. Using the correct oil capacity, viscosity, and type is essential for maintaining performance and longevity. This guide lists all model years with full oil specifications and maintenance recommendations.
For the US market, the eighth and ninth generation Galant models (1999-2012) represent the most common versions requiring regular maintenance. These models were equipped with either four-cylinder or V6 engines, each with specific oil requirements.
Quick Navigation
2012 Mitsubishi Galant Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 2.4L MIVEC I4 (4G69) |
| Oil Capacity (with Filter) | 4.2 qt (4.0 L) |
| Oil Capacity (without Filter) | 3.7 qt (3.5 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 29 lb-ft (39 N·m) |
| Recommended Filters | Mitsubishi MZ690116, Fram PH3593A, Mobil 1 M1-110A |
The 2012 Mitsubishi Galant uses a 2.4L MIVEC four-cylinder engine that requires 4.2 quarts of full synthetic oil with the filter. Using SAE 5W-20 oil provides the right balance of protection and efficiency under normal driving conditions.
2011 Mitsubishi Galant Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 2.4L MIVEC I4 (4G69) |
| Oil Capacity (with Filter) | 4.2 qt (4.0 L) |
| Oil Capacity (without Filter) | 3.7 qt (3.5 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 29 lb-ft (39 N·m) |
| Recommended Filters | Mitsubishi MZ690116, Fram PH3593A, Mobil 1 M1-110A |
The 2011 Mitsubishi Galant requires 4.2 quarts of SAE 5W-20 full synthetic oil with the filter installed. This model year continued with the four-cylinder engine only after the V6 option was discontinued.
2010 Mitsubishi Galant Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 2.4L MIVEC I4 (4G69) |
| Oil Capacity (with Filter) | 4.2 qt (4.0 L) |
| Oil Capacity (without Filter) | 3.7 qt (3.5 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 29 lb-ft (39 N·m) |
| Recommended Filters | Mitsubishi MZ690116, Fram PH3593A, Mobil 1 M1-110A |
The 2010 Mitsubishi Galant was the first year to offer only the four-cylinder engine after dropping the V6 option. This 2.4L engine requires 4.2 quarts of SAE 5W-20 synthetic oil for optimal performance.
2009 Mitsubishi Galant Engine Oil Capacity
2.4L Four-Cylinder Engine
| Specification | Detail |
|---|---|
| Engine | 2.4L MIVEC I4 (4G69) |
| Oil Capacity (with Filter) | 4.5 qt (4.3 L) |
| Oil Capacity (without Filter) | 4.2 qt (4.0 L) |
| Recommended Oil Type | Full Synthetic / Synthetic Blend |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 29 lb-ft (39 N·m) |
| Recommended Filters | Mitsubishi MZ690116, Fram PH3593A, Mobil 1 M1-110A |
3.8L V6 Engine
| Specification | Detail |
|---|---|
| Engine | 3.8L V6 (6G75) |
| Oil Capacity (with Filter) | 4.5 qt (4.3 L) |
| Oil Capacity (without Filter) | 4.2 qt (4.0 L) |
| Recommended Oil Type | Full Synthetic / Synthetic Blend |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 29 lb-ft (39 N·m) |
| Recommended Filters | Mitsubishi MZ690116, Fram PH3593A, Mobil 1 M1-110A |
The 2009 Mitsubishi Galant received styling updates and was available with both four-cylinder and V6 engines. Both engine options require 4.5 quarts of oil with appropriate viscosity ratings for each configuration.
2008 Mitsubishi Galant Engine Oil Capacity
2.4L Four-Cylinder Engine
| Specification | Detail |
|---|---|
| Engine | 2.4L MIVEC I4 (4G69) |
| Oil Capacity (with Filter) | 4.5 qt (4.3 L) |
| Oil Capacity (without Filter) | 4.2 qt (4.0 L) |
| Recommended Oil Type | Full Synthetic / Synthetic Blend |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 29 lb-ft (39 N·m) |
| Recommended Filters | Mitsubishi MZ690116, Fram PH3593A, Mobil 1 M1-110A |
3.8L V6 Engine
| Specification | Detail |
|---|---|
| Engine | 3.8L V6 (6G75) |
| Oil Capacity (with Filter) | 4.5 qt (4.3 L) |
| Oil Capacity (without Filter) | 4.2 qt (4.0 L) |
| Recommended Oil Type | Full Synthetic / Synthetic Blend |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 29 lb-ft (39 N·m) |
| Recommended Filters | Mitsubishi MZ690116, Fram PH3593A, Mobil 1 M1-110A |
The 2008 Mitsubishi Galant requires 4.5 quarts of engine oil for both four-cylinder and V6 configurations. The four-cylinder engine uses 5W-20 viscosity while the V6 uses 5W-30 for optimal lubrication.
2007 Mitsubishi Galant Engine Oil Capacity
2.4L Four-Cylinder Engine
| Specification | Detail |
|---|---|
| Engine | 2.4L MIVEC I4 (4G69) |
| Oil Capacity (with Filter) | 4.5 qt (4.3 L) |
| Oil Capacity (without Filter) | 4.2 qt (4.0 L) |
| Recommended Oil Type | Full Synthetic / Synthetic Blend |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 29 lb-ft (39 N·m) |
| Recommended Filters | Mitsubishi MZ690116, Fram PH3593A, Mobil 1 M1-110A |
3.8L V6 Engine
| Specification | Detail |
|---|---|
| Engine | 3.8L V6 (6G75) |
| Oil Capacity (with Filter) | 4.5 qt (4.3 L) |
| Oil Capacity (without Filter) | 4.2 qt (4.0 L) |
| Recommended Oil Type | Full Synthetic / Synthetic Blend |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 29 lb-ft (39 N·m) |
| Recommended Filters | Mitsubishi MZ690116, Fram PH3593A, Mobil 1 M1-110A |
The 2007 Mitsubishi Galant received a new grille, bumpers, and interior updates. Both engine options require 4.5 quarts of oil with filter replacement for proper lubrication.
2006 Mitsubishi Galant Engine Oil Capacity
2.4L Four-Cylinder Engine
| Specification | Detail |
|---|---|
| Engine | 2.4L SOHC I4 (4G64) |
| Oil Capacity (with Filter) | 4.5 qt (4.3 L) |
| Oil Capacity (without Filter) | 4.2 qt (4.0 L) |
| Recommended Oil Type | Synthetic Blend / Conventional |
| Viscosity | SAE 5W-30 / 10W-30 |
| Oil Change Interval | Every 5,000 miles or 6 months |
| Oil Drain Plug Torque | 29 lb-ft (39 N·m) |
| Recommended Filters | Mitsubishi MZ690116, Fram PH3593A, Mobil 1 M1-110A |
3.8L V6 Engine
| Specification | Detail |
|---|---|
| Engine | 3.8L V6 (6G75) |
| Oil Capacity (with Filter) | 4.5 qt (4.3 L) |
| Oil Capacity (without Filter) | 4.2 qt (4.0 L) |
| Recommended Oil Type | Synthetic Blend / Conventional |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 5,000 miles or 6 months |
| Oil Drain Plug Torque | 29 lb-ft (39 N·m) |
| Recommended Filters | Mitsubishi MZ690116, Fram PH3593A, Mobil 1 M1-110A |
The 2006 Mitsubishi Galant uses 4.5 quarts of oil for both engine configurations. This was the last year before the 2007 redesign that introduced updated styling elements.
2005 Mitsubishi Galant Engine Oil Capacity
2.4L Four-Cylinder Engine
| Specification | Detail |
|---|---|
| Engine | 2.4L SOHC I4 (4G64) |
| Oil Capacity (with Filter) | 4.5 qt (4.3 L) |
| Oil Capacity (without Filter) | 4.2 qt (4.0 L) |
| Recommended Oil Type | Synthetic Blend / Conventional |
| Viscosity | SAE 5W-30 / 10W-30 |
| Oil Change Interval | Every 5,000 miles or 6 months |
| Oil Drain Plug Torque | 29 lb-ft (39 N·m) |
| Recommended Filters | Mitsubishi MZ690116, Fram PH3593A, Mobil 1 M1-110A |
3.8L V6 Engine
| Specification | Detail |
|---|---|
| Engine | 3.8L V6 (6G75) |
| Oil Capacity (with Filter) | 4.5 qt (4.3 L) |
| Oil Capacity (without Filter) | 4.2 qt (4.0 L) |
| Recommended Oil Type | Synthetic Blend / Conventional |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 5,000 miles or 6 months |
| Oil Drain Plug Torque | 29 lb-ft (39 N·m) |
| Recommended Filters | Mitsubishi MZ690116, Fram PH3593A, Mobil 1 M1-110A |
The 2005 Mitsubishi Galant requires 4.5 quarts of engine oil with the filter for both four-cylinder and V6 models. These engines use SAE 5W-30 or 10W-30 viscosity oil depending on climate conditions.
2004 Mitsubishi Galant Engine Oil Capacity
2.4L Four-Cylinder Engine
| Specification | Detail |
|---|---|
| Engine | 2.4L SOHC I4 (4G64) |
| Oil Capacity (with Filter) | 4.5 qt (4.3 L) |
| Oil Capacity (without Filter) | 4.2 qt (4.0 L) |
| Recommended Oil Type | Synthetic Blend / Conventional |
| Viscosity | SAE 5W-30 / 10W-30 |
| Oil Change Interval | Every 5,000 miles or 6 months |
| Oil Drain Plug Torque | 29 lb-ft (39 N·m) |
| Recommended Filters | Mitsubishi MZ690116, Fram PH3593A, Mobil 1 M1-110A |
3.8L V6 Engine
| Specification | Detail |
|---|---|
| Engine | 3.8L V6 (6G75) |
| Oil Capacity (with Filter) | 4.5 qt (4.3 L) |
| Oil Capacity (without Filter) | 4.2 qt (4.0 L) |
| Recommended Oil Type | Synthetic Blend / Conventional |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 5,000 miles or 6 months |
| Oil Drain Plug Torque | 29 lb-ft (39 N·m) |
| Recommended Filters | Mitsubishi MZ690116, Fram PH3593A, Mobil 1 M1-110A |
The 2004 Mitsubishi Galant marked the introduction of a new generation design. Both engine options require 4.5 quarts of oil with appropriate viscosity ratings for temperature ranges.
2003 Mitsubishi Galant Engine Oil Capacity
2.4L Four-Cylinder Engine
| Specification | Detail |
|---|---|
| Engine | 2.4L SOHC I4 (4G64) |
| Oil Capacity (with Filter) | 4.5 qt (4.3 L) |
| Oil Capacity (without Filter) | 4.2 qt (4.0 L) |
| Recommended Oil Type | Synthetic Blend / Conventional |
| Viscosity | SAE 5W-30 / 10W-30 |
| Oil Change Interval | Every 5,000 miles or 6 months |
| Oil Drain Plug Torque | 29 lb-ft (39 N·m) |
| Recommended Filters | Mitsubishi MZ690116, Fram PH3593A, Mobil 1 M1-110A |
3.0L V6 Engine
| Specification | Detail |
|---|---|
| Engine | 3.0L V6 (6G72) |
| Oil Capacity (with Filter) | 4.5 qt (4.3 L) |
| Oil Capacity (without Filter) | 4.2 qt (4.0 L) |
| Recommended Oil Type | Synthetic Blend / Conventional |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 5,000 miles or 6 months |
| Oil Drain Plug Torque | 29 lb-ft (39 N·m) |
| Recommended Filters | Mitsubishi MZ690116, Fram PH3593A, Mobil 1 M1-110A |
The 2003 Mitsubishi Galant uses 4.5 quarts of oil for both four-cylinder and 3.0L V6 engines. Proper oil viscosity selection ensures adequate lubrication across operating temperatures.
2002 Mitsubishi Galant Engine Oil Capacity
2.4L Four-Cylinder Engine
| Specification | Detail |
|---|---|
| Engine | 2.4L SOHC I4 (4G64) |
| Oil Capacity (with Filter) | 4.5 qt (4.3 L) |
| Oil Capacity (without Filter) | 4.2 qt (4.0 L) |
| Recommended Oil Type | Synthetic Blend / Conventional |
| Viscosity | SAE 5W-30 / 10W-30 |
| Oil Change Interval | Every 5,000 miles or 6 months |
| Oil Drain Plug Torque | 29 lb-ft (39 N·m) |
| Recommended Filters | Mitsubishi MZ690116, Fram PH3593A, Mobil 1 M1-110A |
3.0L V6 Engine
| Specification | Detail |
|---|---|
| Engine | 3.0L V6 (6G72) |
| Oil Capacity (with Filter) | 4.5 qt (4.3 L) |
| Oil Capacity (without Filter) | 4.2 qt (4.0 L) |
| Recommended Oil Type | Synthetic Blend / Conventional |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 5,000 miles or 6 months |
| Oil Drain Plug Torque | 29 lb-ft (39 N·m) |
| Recommended Filters | Mitsubishi MZ690116, Fram PH3593A, Mobil 1 M1-110A |
The 2002 Mitsubishi Galant requires 4.5 quarts of engine oil with the filter installed. Both engine configurations benefit from regular oil changes at 5,000 mile intervals.
2001 Mitsubishi Galant Engine Oil Capacity
2.4L Four-Cylinder Engine
| Specification | Detail |
|---|---|
| Engine | 2.4L SOHC I4 (4G64) |
| Oil Capacity (with Filter) | 4.5 qt (4.3 L) |
| Oil Capacity (without Filter) | 4.2 qt (4.0 L) |
| Recommended Oil Type | Synthetic Blend / Conventional |
| Viscosity | SAE 5W-30 / 10W-30 |
| Oil Change Interval | Every 5,000 miles or 6 months |
| Oil Drain Plug Torque | 29 lb-ft (39 N·m) |
| Recommended Filters | Mitsubishi MZ690116, Fram PH3593A, Mobil 1 M1-110A |
3.0L V6 Engine
| Specification | Detail |
|---|---|
| Engine | 3.0L V6 (6G72) |
| Oil Capacity (with Filter) | 4.5 qt (4.3 L) |
| Oil Capacity (without Filter) | 4.2 qt (4.0 L) |
| Recommended Oil Type | Synthetic Blend / Conventional |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 5,000 miles or 6 months |
| Oil Drain Plug Torque | 29 lb-ft (39 N·m) |
| Recommended Filters | Mitsubishi MZ690116, Fram PH3593A, Mobil 1 M1-110A |
The 2001 Mitsubishi Galant uses 4.5 quarts of oil for both engine options. This model year saw increased oil capacity compared to earlier generations for improved engine protection.
2000 Mitsubishi Galant Engine Oil Capacity
2.4L Four-Cylinder Engine
| Specification | Detail |
|---|---|
| Engine | 2.4L SOHC I4 (4G64) |
| Oil Capacity (with Filter) | 4.0 qt (3.8 L) |
| Oil Capacity (without Filter) | 3.7 qt (3.5 L) |
| Recommended Oil Type | Conventional / Synthetic Blend |
| Viscosity | SAE 5W-30 / 10W-30 |
| Oil Change Interval | Every 3,000-5,000 miles or 6 months |
| Oil Drain Plug Torque | 29 lb-ft (39 N·m) |
| Recommended Filters | Mitsubishi MZ690116, Fram PH3593A, Mobil 1 M1-110A |
3.0L V6 Engine
| Specification | Detail |
|---|---|
| Engine | 3.0L V6 (6G72) |
| Oil Capacity (with Filter) | 4.5 qt (4.3 L) |
| Oil Capacity (without Filter) | 4.2 qt (4.0 L) |
| Recommended Oil Type | Conventional / Synthetic Blend |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 3,000-5,000 miles or 6 months |
| Oil Drain Plug Torque | 29 lb-ft (39 N·m) |
| Recommended Filters | Mitsubishi MZ690116, Fram PH3593A, Mobil 1 M1-110A |
The 2000 Mitsubishi Galant four-cylinder engine requires 4.0 quarts of oil while the V6 needs 4.5 quarts. This generation uses conventional or synthetic blend oil for adequate engine protection.
1999 Mitsubishi Galant Engine Oil Capacity
2.4L Four-Cylinder Engine
| Specification | Detail |
|---|---|
| Engine | 2.4L SOHC I4 (4G64) |
| Oil Capacity (with Filter) | 4.0 qt (3.8 L) |
| Oil Capacity (without Filter) | 3.7 qt (3.5 L) |
| Recommended Oil Type | Conventional / Synthetic Blend |
| Viscosity | SAE 5W-30 / 10W-30 |
| Oil Change Interval | Every 3,000-5,000 miles or 6 months |
| Oil Drain Plug Torque | 29 lb-ft (39 N·m) |
| Recommended Filters | Mitsubishi MZ690116, Fram PH3593A, Mobil 1 M1-110A |
3.0L V6 Engine
| Specification | Detail |
|---|---|
| Engine | 3.0L V6 (6G72) |
| Oil Capacity (with Filter) | 4.5 qt (4.3 L) |
| Oil Capacity (without Filter) | 4.2 qt (4.0 L) |
| Recommended Oil Type | Conventional / Synthetic Blend |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 3,000-5,000 miles or 6 months |
| Oil Drain Plug Torque | 29 lb-ft (39 N·m) |
| Recommended Filters | Mitsubishi MZ690116, Fram PH3593A, Mobil 1 M1-110A |
The 1999 Mitsubishi Galant marked the introduction of the eighth generation design. The four-cylinder engine requires 4.0 quarts while the V6 uses 4.5 quarts of engine oil.
Oil Maintenance and Service Tips
Regular oil changes are critical for maintaining engine performance and preventing premature wear. Check the oil level monthly using the dipstick when the engine is cold and the vehicle is on level ground. The oil should fall between the minimum and maximum marks on the dipstick.
Full synthetic oil provides superior protection and can extend oil change intervals to 7,500 miles under normal driving conditions. Severe driving conditions such as frequent short trips, dusty environments, or extreme temperatures require more frequent oil changes at 3,000 to 5,000 mile intervals. Always replace the oil filter during each oil change to maintain proper filtration and oil flow.
The oil drain plug should be torqued to 29 lb-ft (39 N·m) to prevent leaks without damaging the oil pan threads. Using the correct oil viscosity for your climate ensures proper engine lubrication during cold starts and high temperature operation. Mitsubishi recommends using API SM or higher rated oil for modern Galant models.
Frequently Asked Questions
What kind of oil does a Mitsubishi Galant use?
The Mitsubishi Galant uses full synthetic or synthetic blend oil depending on the model year. Models from 2007-2012 require SAE 5W-20 synthetic oil, while earlier models use 5W-30 or 10W-30 viscosity. The oil should meet API SM or higher specifications for proper engine protection.
How much oil does a Mitsubishi Galant take?
The Mitsubishi Galant oil capacity ranges from 4.0 to 4.5 quarts depending on the model year and engine. Four-cylinder models from 1999-2000 require 4.0 quarts, while 2001-2012 four-cylinder models need 4.2 to 4.5 quarts. V6 models consistently require 4.5 quarts with the oil filter.
What is the recommended oil type for a Mitsubishi Galant?
Mitsubishi recommends full synthetic oil for 2007-2012 Galant models and synthetic blend or conventional oil for earlier years. Full synthetic oil provides better protection at extreme temperatures and can extend drain intervals. The oil should meet API SM, SN, or higher ratings for optimal performance.
What is the oil change interval for a Mitsubishi Galant?
The oil change interval for a Mitsubishi Galant is every 7,500 miles or 12 months for models using synthetic oil. Earlier models using conventional oil should have changes every 3,000 to 5,000 miles. Severe driving conditions require more frequent oil changes regardless of oil type.
What oil filter fits a Mitsubishi Galant?
The OEM oil filter for Mitsubishi Galant models is part number MZ690116. Aftermarket equivalent filters include Fram PH3593A, Mobil 1 M1-110A, and K&N HP-1004. Always verify fitment for your specific model year before purchasing.
What is the oil drain plug torque for a Mitsubishi Galant?
The oil drain plug torque specification for the Mitsubishi Galant is 29 lb-ft (39 N·m). Proper torque prevents oil leaks while avoiding thread damage to the oil pan. Always use a torque wrench for accurate tightening.
Conclusion
The Mitsubishi Galant requires between 4.0 and 4.5 quarts of engine oil depending on the model year and engine configuration. Using the correct viscosity (5W-20 for newer models, 5W-30 or 10W-30 for older models) ensures proper lubrication and performance. Full synthetic oil provides superior protection and extends service intervals to 7,500 miles under normal conditions.
Following manufacturer specifications for oil capacity, type, and viscosity is essential for maintaining engine reliability and preventing premature wear. Regular oil changes at recommended intervals protect internal engine components and ensure optimal performance throughout the vehicle’s service life.
