The Ford Bronco has been produced from 1966 to 1996 and reintroduced in 2021 with multiple engine options across its generations. Using the correct oil capacity, viscosity, and type is essential for maintaining performance and longevity. This guide lists all model years with full oil specifications and maintenance recommendations.
The modern sixth-generation Bronco (2021-present) features three turbocharged EcoBoost engines, while the Bronco Sport offers two smaller EcoBoost options. Classic Broncos (1966-1996) used inline-six and V8 engines with varying oil requirements. Proper oil specification ensures optimal engine protection and fuel efficiency across all model years.
Quick Navigation
2025 Ford Bronco Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 2.3L EcoBoost I4 Turbo |
| Oil Capacity (with Filter) | 6.2 qt (5.87 L) |
| Oil Capacity (without Filter) | 5.5 qt (5.21 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Motorcraft FL-910-S, K&N HP-1017, Mobil 1 M1-110A |
The 2025 Ford Bronco with the 2.3L EcoBoost engine requires 6.2 quarts of full synthetic SAE 5W-30 oil with filter. Using oil meeting Ford WSS-M2C961-A1 specification provides optimal protection for turbocharged engines.
| Specification | Detail |
|---|---|
| Engine | 2.7L EcoBoost V6 Twin-Turbo |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.3 qt (5.01 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Motorcraft FL-2062-A, K&N HP-1042, Mobil 1 M1-14991 |
The 2025 Ford Bronco with the 2.7L EcoBoost V6 engine uses 6.0 quarts of full synthetic SAE 5W-30 oil. Ford updated the capacity specification from the original 5.7 quarts to 6.0 quarts for improved engine protection.
| Specification | Detail |
|---|---|
| Engine | 3.0L EcoBoost V6 Twin-Turbo (Raptor) |
| Oil Capacity (with Filter) | 5.7 qt (5.40 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-50 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Motorcraft FL-2062-A, K&N HP-1042 |
The 2025 Ford Bronco Raptor with the 3.0L EcoBoost engine requires 5.7 quarts of full synthetic SAE 5W-50 oil. The heavier viscosity oil meeting Ford WSS-M2C931-E1 specification is designed for high-performance applications and track use.
2024 Ford Bronco Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 2.3L EcoBoost I4 Turbo |
| Oil Capacity (with Filter) | 6.2 qt (5.87 L) |
| Oil Capacity (without Filter) | 5.5 qt (5.21 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Motorcraft FL-910-S, K&N HP-1017, Mobil 1 M1-110A |
The 2024 Ford Bronco 2.3L EcoBoost engine uses 6.2 quarts of SAE 5W-30 full synthetic oil with filter. Motorcraft oil meeting Ford WSS-M2C961-A1 specification ensures proper lubrication under all operating conditions.
| Specification | Detail |
|---|---|
| Engine | 2.7L EcoBoost V6 Twin-Turbo |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.3 qt (5.01 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Motorcraft FL-2062-A, K&N HP-1042, Mobil 1 M1-14991 |
The 2024 Ford Bronco 2.7L EcoBoost requires 6.0 quarts of full synthetic SAE 5W-30 oil. The oil filter housing should be torqued to 18 lb-ft or 24 Newton meters.
| Specification | Detail |
|---|---|
| Engine | 3.0L EcoBoost V6 Twin-Turbo (Raptor) |
| Oil Capacity (with Filter) | 5.7 qt (5.40 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-50 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Motorcraft FL-2062-A, K&N HP-1042 |
The 2024 Ford Bronco Raptor requires 5.7 quarts of SAE 5W-50 full synthetic oil meeting Ford WSS-M2C931-E1 specification. This heavier viscosity provides enhanced protection for the high-performance twin-turbo V6 engine.
2023 Ford Bronco Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 2.3L EcoBoost I4 Turbo |
| Oil Capacity (with Filter) | 6.2 qt (5.87 L) |
| Oil Capacity (without Filter) | 5.5 qt (5.21 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Motorcraft FL-910-S, K&N HP-1017, Mobil 1 M1-110A |
The 2023 Ford Bronco 2.3L EcoBoost engine requires 6.2 quarts of SAE 5W-30 full synthetic oil. Using Motorcraft oil ensures compliance with Ford WSS-M2C961-A1 specification for turbo engine protection.
| Specification | Detail |
|---|---|
| Engine | 2.7L EcoBoost V6 Twin-Turbo |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.3 qt (5.01 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Motorcraft FL-2062-A, K&N HP-1042, Mobil 1 M1-14991 |
The 2023 Ford Bronco 2.7L EcoBoost V6 uses 6.0 quarts of full synthetic SAE 5W-30 oil with filter. Ford service documentation specifies this updated capacity for all 2021-2023 model years with this engine.
| Specification | Detail |
|---|---|
| Engine | 3.0L EcoBoost V6 Twin-Turbo (Raptor) |
| Oil Capacity (with Filter) | 5.7 qt (5.40 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-50 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Motorcraft FL-2062-A, K&N HP-1042 |
The 2023 Ford Bronco Raptor requires 5.7 quarts of SAE 5W-50 full synthetic oil. The Motorcraft XO-5W50-QGT oil meeting WSS-M2C931-E1 specification is specifically formulated for this high-output engine.
2022 Ford Bronco Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 2.3L EcoBoost I4 Turbo |
| Oil Capacity (with Filter) | 6.2 qt (5.87 L) |
| Oil Capacity (without Filter) | 5.5 qt (5.21 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Motorcraft FL-910-S, K&N HP-1017, Mobil 1 M1-110A |
The 2022 Ford Bronco 2.3L EcoBoost engine uses 6.2 quarts of full synthetic SAE 5W-30 oil. The oil drain plug requires 20 lb-ft of torque when reinstalling.
| Specification | Detail |
|---|---|
| Engine | 2.7L EcoBoost V6 Twin-Turbo |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.3 qt (5.01 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Motorcraft FL-2062-A, K&N HP-1042, Mobil 1 M1-14991 |
The 2022 Ford Bronco 2.7L EcoBoost requires 6.0 quarts of SAE 5W-30 full synthetic oil meeting Ford specifications. Ford updated the oil capacity specification to 6.0 quarts for improved lubrication and engine protection.
| Specification | Detail |
|---|---|
| Engine | 3.0L EcoBoost V6 Twin-Turbo (Raptor) |
| Oil Capacity (with Filter) | 5.7 qt (5.40 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-50 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Motorcraft FL-2062-A, K&N HP-1042 |
The 2022 Ford Bronco Raptor uses 5.7 quarts of SAE 5W-50 full synthetic oil. The heavier viscosity oil provides additional protection for the high-performance 3.0L twin-turbo engine under extreme conditions.
2021 Ford Bronco Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 2.3L EcoBoost I4 Turbo |
| Oil Capacity (with Filter) | 6.2 qt (5.87 L) |
| Oil Capacity (without Filter) | 5.5 qt (5.21 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Motorcraft FL-910-S, K&N HP-1017, Mobil 1 M1-110A |
The 2021 Ford Bronco 2.3L EcoBoost engine requires 6.2 quarts of SAE 5W-30 full synthetic oil with filter. This first-year model uses the same oil specifications as later sixth-generation Broncos.
| Specification | Detail |
|---|---|
| Engine | 2.7L EcoBoost V6 Twin-Turbo |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.3 qt (5.01 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Motorcraft FL-2062-A, K&N HP-1042, Mobil 1 M1-14991 |
The 2021 Ford Bronco 2.7L EcoBoost V6 uses 6.0 quarts of full synthetic SAE 5W-30 oil. Ford updated the capacity from the original 5.7 quarts specification to 6.0 quarts for all 2021-2022 model years.
2025 Ford Bronco Sport Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 1.5L EcoBoost I3 Turbo |
| Oil Capacity (with Filter) | 5.0 qt (4.73 L) |
| Oil Capacity (without Filter) | 4.3 qt (4.07 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 0W-20 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 21 lb-ft (28 N·m) |
| Recommended Filters | Motorcraft FL-910-S, K&N HP-1017 |
The 2025 Ford Bronco Sport 1.5L EcoBoost engine uses 5.0 quarts of SAE 0W-20 full synthetic oil with filter. Using oil meeting Ford WSS-M2C962-A1 specification ensures proper protection for the three-cylinder turbo engine.
| Specification | Detail |
|---|---|
| Engine | 2.0L EcoBoost I4 Turbo |
| Oil Capacity (with Filter) | 5.5 qt (5.20 L) |
| Oil Capacity (without Filter) | 4.8 qt (4.54 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 21 lb-ft (28 N·m) |
| Recommended Filters | Motorcraft FL-500-S, K&N HP-1008 |
The 2025 Ford Bronco Sport 2.0L EcoBoost requires 5.5 quarts of SAE 5W-30 full synthetic oil. The oil should meet Ford WSS-M2C961-A1 specification for optimal turbocharged engine performance.
2024 Ford Bronco Sport Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 1.5L EcoBoost I3 Turbo |
| Oil Capacity (with Filter) | 5.0 qt (4.73 L) |
| Oil Capacity (without Filter) | 4.3 qt (4.07 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 0W-20 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 21 lb-ft (28 N·m) |
| Recommended Filters | Motorcraft FL-910-S, K&N HP-1017 |
The 2024 Ford Bronco Sport 1.5L EcoBoost uses 5.0 quarts of SAE 0W-20 full synthetic oil. Ford updated the 1.5L oil capacity during production from the original 5.34 quarts to improve engine protection.
| Specification | Detail |
|---|---|
| Engine | 2.0L EcoBoost I4 Turbo |
| Oil Capacity (with Filter) | 5.5 qt (5.20 L) |
| Oil Capacity (without Filter) | 4.8 qt (4.54 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 21 lb-ft (28 N·m) |
| Recommended Filters | Motorcraft FL-500-S, K&N HP-1008 |
The 2024 Ford Bronco Sport 2.0L EcoBoost engine requires 5.5 quarts of SAE 5W-30 full synthetic oil with filter. The cartridge-style oil filter should be properly torqued to ensure proper sealing.
2023 Ford Bronco Sport Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 1.5L EcoBoost I3 Turbo |
| Oil Capacity (with Filter) | 5.0 qt (4.73 L) |
| Oil Capacity (without Filter) | 4.3 qt (4.07 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 0W-20 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 21 lb-ft (28 N·m) |
| Recommended Filters | Motorcraft FL-910-S, K&N HP-1017 |
The 2023 Ford Bronco Sport 1.5L EcoBoost requires 5.0 quarts of SAE 0W-20 full synthetic oil. The lower viscosity oil improves fuel economy while maintaining adequate protection for the turbocharged three-cylinder engine.
| Specification | Detail |
|---|---|
| Engine | 2.0L EcoBoost I4 Turbo |
| Oil Capacity (with Filter) | 5.5 qt (5.20 L) |
| Oil Capacity (without Filter) | 4.8 qt (4.54 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 21 lb-ft (28 N·m) |
| Recommended Filters | Motorcraft FL-500-S, K&N HP-1008 |
The 2023 Ford Bronco Sport 2.0L EcoBoost uses 5.5 quarts of SAE 5W-30 full synthetic oil. Oil meeting Ford WSS-M2C961-A1 specification provides proper protection for turbo components.
2022 Ford Bronco Sport Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 1.5L EcoBoost I3 Turbo |
| Oil Capacity (with Filter) | 5.0 qt (4.73 L) |
| Oil Capacity (without Filter) | 4.3 qt (4.07 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 0W-20 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 21 lb-ft (28 N·m) |
| Recommended Filters | Motorcraft FL-910-S, K&N HP-1017 |
The 2022 Ford Bronco Sport 1.5L EcoBoost engine uses 5.0 quarts of SAE 0W-20 full synthetic oil. Early 2022 models may have been originally specified at 6.6 quarts, but Ford revised the specification.
| Specification | Detail |
|---|---|
| Engine | 2.0L EcoBoost I4 Turbo |
| Oil Capacity (with Filter) | 5.5 qt (5.20 L) |
| Oil Capacity (without Filter) | 4.8 qt (4.54 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 21 lb-ft (28 N·m) |
| Recommended Filters | Motorcraft FL-500-S, K&N HP-1008 |
The 2022 Ford Bronco Sport 2.0L EcoBoost requires 5.5 quarts of SAE 5W-30 full synthetic oil with filter. The 2.0L engine capacity is 5.2 liters or 5.5 US quarts.
2021 Ford Bronco Sport Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 1.5L EcoBoost I3 Turbo |
| Oil Capacity (with Filter) | 5.0 qt (4.73 L) |
| Oil Capacity (without Filter) | 4.3 qt (4.07 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 0W-20 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 21 lb-ft (28 N·m) |
| Recommended Filters | Motorcraft FL-910-S, K&N HP-1017 |
The 2021 Ford Bronco Sport 1.5L EcoBoost uses 5.0 quarts of SAE 0W-20 full synthetic oil. Build date affects oil capacity specification, with changes occurring around mid-2021 production.
| Specification | Detail |
|---|---|
| Engine | 2.0L EcoBoost I4 Turbo |
| Oil Capacity (with Filter) | 5.5 qt (5.20 L) |
| Oil Capacity (without Filter) | 4.8 qt (4.54 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 21 lb-ft (28 N·m) |
| Recommended Filters | Motorcraft FL-500-S, K&N HP-1008 |
The 2021 Ford Bronco Sport 2.0L EcoBoost requires 5.5 quarts of SAE 5W-30 full synthetic oil. This first model year uses the same oil specifications as later Bronco Sport models.
1996 Ford Bronco Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 5.0L V8 (302 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional or Synthetic Blend |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 3,000-5,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600, K&N HP-2009 |
The 1996 Ford Bronco 5.0L V8 uses 6.0 quarts of SAE 5W-30 oil with filter. Ford service bulletins from the late 1990s standardized 5W-30 as the preferred viscosity for all gasoline engines.
| Specification | Detail |
|---|---|
| Engine | 5.8L V8 (351 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional or Synthetic Blend |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 3,000-5,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600, K&N HP-2009 |
The 1996 Ford Bronco 5.8L V8 requires 6.0 quarts of SAE 5W-30 oil. This was the final production year for the fifth-generation Bronco before a 25-year hiatus.
1995 Ford Bronco Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 5.0L V8 (302 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional or Synthetic Blend |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 3,000-5,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600, K&N HP-2009 |
The 1995 Ford Bronco 5.0L V8 uses 6.0 quarts of SAE 5W-30 oil. The fuel-injected 5.0L V8 produces 199 horsepower in this model year.
| Specification | Detail |
|---|---|
| Engine | 5.8L V8 (351 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional or Synthetic Blend |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 3,000-5,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600, K&N HP-2009 |
The 1995 Ford Bronco 5.8L V8 requires 6.0 quarts of SAE 5W-30 oil with filter. Both V8 engines in this year use the same oil capacity and viscosity.
1994 Ford Bronco Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 5.0L V8 (302 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional or Synthetic Blend |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 3,000-5,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600, K&N HP-2009 |
The 1994 Ford Bronco 5.0L V8 uses 6.0 quarts of SAE 5W-30 oil. The 4.9L inline-six was withdrawn from the Bronco lineup after 1993, making 1994 the first V8-only model year.
| Specification | Detail |
|---|---|
| Engine | 5.8L V8 (351 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional or Synthetic Blend |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 3,000-5,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600, K&N HP-2009 |
The 1994 Ford Bronco 5.8L V8 requires 6.0 quarts of SAE 5W-30 oil. The high-output 5.8L V8 remained the top engine option for this model year.
1993 Ford Bronco Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 4.9L I6 (300 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional or Synthetic Blend |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 3,000-5,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600, K&N HP-2009 |
The 1993 Ford Bronco 4.9L inline-six uses 6.0 quarts of SAE 5W-30 oil. Fuel injection was added to the 4.9L engine in 1987, improving performance and efficiency.
| Specification | Detail |
|---|---|
| Engine | 5.0L V8 (302 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional or Synthetic Blend |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 3,000-5,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600, K&N HP-2009 |
The 1993 Ford Bronco 5.0L V8 requires 6.0 quarts of SAE 5W-30 oil. The fuel-injected 5.0L V8 was added to the lineup in 1985.
| Specification | Detail |
|---|---|
| Engine | 5.8L V8 (351 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional or Synthetic Blend |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 3,000-5,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600, K&N HP-2009 |
The 1993 Ford Bronco 5.8L V8 uses 6.0 quarts of SAE 5W-30 oil with filter. The 5.8L high-output V8 received fuel injection in 1988.
1992 Ford Bronco Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 4.9L I6 (300 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional or Synthetic Blend |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 3,000-5,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600, K&N HP-2009 |
The 1992 Ford Bronco 4.9L inline-six requires 6.0 quarts of SAE 5W-30 oil. This engine was carried over from previous fifth-generation models.
| Specification | Detail |
|---|---|
| Engine | 5.0L V8 (302 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional or Synthetic Blend |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 3,000-5,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600, K&N HP-2009 |
The 1992 Ford Bronco 5.0L V8 uses 6.0 quarts of SAE 5W-30 oil. All three engine options remained available in this model year.
| Specification | Detail |
|---|---|
| Engine | 5.8L V8 (351 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional or Synthetic Blend |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 3,000-5,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600, K&N HP-2009 |
The 1992 Ford Bronco 5.8L V8 requires 6.0 quarts of SAE 5W-30 oil with filter. The fifth-generation Bronco introduced in 1992 carried over the previous generation powertrains.
1991 Ford Bronco Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 4.9L I6 (300 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional or Synthetic Blend |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 3,000-5,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600, K&N HP-2009 |
The 1991 Ford Bronco 4.9L inline-six uses 6.0 quarts of SAE 5W-30 oil. This was the final year of the fourth-generation Bronco before the fifth-generation redesign.
| Specification | Detail |
|---|---|
| Engine | 5.0L V8 (302 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional or Synthetic Blend |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 3,000-5,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600, K&N HP-2009 |
The 1991 Ford Bronco 5.0L V8 requires 6.0 quarts of SAE 5W-30 oil. The 5.0L V8 had fuel injection by this model year.
| Specification | Detail |
|---|---|
| Engine | 5.8L V8 (351 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional or Synthetic Blend |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 3,000-5,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600, K&N HP-2009 |
The 1991 Ford Bronco 5.8L V8 uses 6.0 quarts of SAE 5W-30 oil with filter. The high-output 5.8L V8 was fuel-injected starting in 1988.
1990 Ford Bronco Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 4.9L I6 (300 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional or Synthetic Blend |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 3,000-5,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600, K&N HP-2009 |
The 1990 Ford Bronco 4.9L inline-six requires 6.0 quarts of SAE 5W-30 oil. Ford service bulletins later standardized 5W-30 for improved cold-start protection.
| Specification | Detail |
|---|---|
| Engine | 5.0L V8 (302 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional or Synthetic Blend |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 3,000-5,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600, K&N HP-2009 |
The 1990 Ford Bronco 5.0L V8 uses 6.0 quarts of SAE 5W-30 oil. The fuel-injected 5.0L V8 was standard on this model year.
| Specification | Detail |
|---|---|
| Engine | 5.8L V8 (351 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional or Synthetic Blend |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 3,000-5,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600, K&N HP-2009 |
The 1990 Ford Bronco 5.8L V8 requires 6.0 quarts of SAE 5W-30 oil with filter. This model year featured fuel injection on all three available engines.
1989 Ford Bronco Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 4.9L I6 (300 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional or Synthetic Blend |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 3,000-5,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600, K&N HP-2009 |
The 1989 Ford Bronco 4.9L inline-six uses 6.0 quarts of SAE 5W-30 oil. Ford standardized SAE 5W-30 across its gasoline engine lineup for improved cold-weather performance.
| Specification | Detail |
|---|---|
| Engine | 5.0L V8 (302 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional or Synthetic Blend |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 3,000-5,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600, K&N HP-2009 |
The 1989 Ford Bronco 5.0L V8 requires 6.0 quarts of SAE 5W-30 oil. The 5.0L V8 came with fuel injection standard in this model year.
| Specification | Detail |
|---|---|
| Engine | 5.8L V8 (351 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional or Synthetic Blend |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 3,000-5,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600, K&N HP-2009 |
The 1989 Ford Bronco 5.8L V8 uses 6.0 quarts of SAE 5W-30 oil with filter. This was the first year the 5.8L V8 received fuel injection.
1988 Ford Bronco Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 4.9L I6 (300 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional or Synthetic Blend |
| Viscosity | SAE 5W-30 or 10W-30 |
| Oil Change Interval | Every 3,000-5,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600, K&N HP-2009 |
The 1988 Ford Bronco 4.9L inline-six requires 6.0 quarts of SAE 5W-30 or 10W-30 oil. The 4.9L inline-six received fuel injection in 1987.
| Specification | Detail |
|---|---|
| Engine | 5.0L V8 (302 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional or Synthetic Blend |
| Viscosity | SAE 5W-30 or 10W-30 |
| Oil Change Interval | Every 3,000-5,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600, K&N HP-2009 |
The 1988 Ford Bronco 5.0L V8 uses 6.0 quarts of SAE 5W-30 or 10W-30 oil. Both viscosity grades were acceptable depending on climate conditions.
| Specification | Detail |
|---|---|
| Engine | 5.8L V8 (351 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional or Synthetic Blend |
| Viscosity | SAE 5W-30 or 10W-30 |
| Oil Change Interval | Every 3,000-5,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600, K&N HP-2009 |
The 1988 Ford Bronco 5.8L V8 requires 6.0 quarts of SAE 5W-30 or 10W-30 oil with filter. The 5.8L V8 remained carbureted in this year before receiving fuel injection in 1988.
1987 Ford Bronco Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 4.9L I6 (300 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional or Synthetic Blend |
| Viscosity | SAE 5W-30 or 10W-30 |
| Oil Change Interval | Every 3,000-5,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600, K&N HP-2009 |
The 1987 Ford Bronco 4.9L inline-six uses 6.0 quarts of SAE 5W-30 or 10W-30 oil. Fuel injection was added to the inline-six engine for this model year.
| Specification | Detail |
|---|---|
| Engine | 5.0L V8 (302 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional or Synthetic Blend |
| Viscosity | SAE 5W-30 or 10W-30 |
| Oil Change Interval | Every 3,000-5,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600, K&N HP-2009 |
The 1987 Ford Bronco 5.0L V8 requires 6.0 quarts of SAE 5W-30 or 10W-30 oil. The 5.0L V8 was fuel-injected by this model year.
| Specification | Detail |
|---|---|
| Engine | 5.8L V8 (351 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional or Synthetic Blend |
| Viscosity | SAE 5W-30 or 10W-30 |
| Oil Change Interval | Every 3,000-5,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600, K&N HP-2009 |
The 1987 Ford Bronco 5.8L V8 uses 6.0 quarts of SAE 5W-30 or 10W-30 oil with filter. The high-output 5.8L V8 remained available as the top engine option.
1986 Ford Bronco Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 4.9L I6 (300 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional |
| Viscosity | SAE 10W-30 or 5W-30 |
| Oil Change Interval | Every 3,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600 |
The 1986 Ford Bronco 4.9L inline-six requires 6.0 quarts of SAE 10W-30 or 5W-30 oil. The 4.9L engine remained carbureted in this model year.
| Specification | Detail |
|---|---|
| Engine | 5.0L V8 (302 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional |
| Viscosity | SAE 10W-30 or 5W-30 |
| Oil Change Interval | Every 3,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600 |
The 1986 Ford Bronco 5.0L V8 uses 6.0 quarts of SAE 10W-30 or 5W-30 oil. The 5.0L V8 received fuel injection starting in 1985.
| Specification | Detail |
|---|---|
| Engine | 5.8L V8 (351 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional |
| Viscosity | SAE 10W-30 or 5W-30 |
| Oil Change Interval | Every 3,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600 |
The 1986 Ford Bronco 5.8L V8 requires 6.0 quarts of SAE 10W-30 or 5W-30 oil with filter. All three engine options were available in this fourth-generation model year.
1985 Ford Bronco Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 4.9L I6 (300 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional |
| Viscosity | SAE 10W-30 or 5W-30 |
| Oil Change Interval | Every 3,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600 |
The 1985 Ford Bronco 4.9L inline-six uses 6.0 quarts of SAE 10W-30 or 5W-30 oil. The inline-six remained carbureted in this model year.
| Specification | Detail |
|---|---|
| Engine | 5.0L V8 (302 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional |
| Viscosity | SAE 10W-30 or 5W-30 |
| Oil Change Interval | Every 3,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600 |
The 1985 Ford Bronco 5.0L V8 requires 6.0 quarts of SAE 10W-30 or 5W-30 oil. Fuel injection was first introduced on the 5.0L V8 in this model year.
| Specification | Detail |
|---|---|
| Engine | 5.8L V8 (351 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional |
| Viscosity | SAE 10W-30 or 5W-30 |
| Oil Change Interval | Every 3,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600 |
The 1985 Ford Bronco 5.8L V8 uses 6.0 quarts of SAE 10W-30 or 5W-30 oil with filter. The high-output 5.8L V8 remained the top engine choice.
1984 Ford Bronco Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 4.9L I6 (300 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional |
| Viscosity | SAE 10W-30 or 5W-30 |
| Oil Change Interval | Every 3,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600 |
The 1984 Ford Bronco 4.9L inline-six requires 6.0 quarts of SAE 10W-30 or 5W-30 oil. The 4.9L inline-six engine returned to the Bronco lineup for this model year.
| Specification | Detail |
|---|---|
| Engine | 5.0L V8 (302 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional |
| Viscosity | SAE 10W-30 or 5W-30 |
| Oil Change Interval | Every 3,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600 |
The 1984 Ford Bronco 5.0L V8 uses 6.0 quarts of SAE 10W-30 or 5W-30 oil. The 5.0L V8 remained carbureted in this model year.
| Specification | Detail |
|---|---|
| Engine | 5.8L V8 (351 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional |
| Viscosity | SAE 10W-30 or 5W-30 |
| Oil Change Interval | Every 3,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600 |
The 1984 Ford Bronco 5.8L V8 requires 6.0 quarts of SAE 10W-30 or 5W-30 oil with filter. The 5.8L V8 continued as the high-output engine option.
1983 Ford Bronco Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 5.0L V8 (302 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional |
| Viscosity | SAE 10W-30 or 5W-30 |
| Oil Change Interval | Every 3,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600 |
The 1983 Ford Bronco 5.0L V8 uses 6.0 quarts of SAE 10W-30 or 5W-30 oil. The 5.0L V8 was the base engine option for this model year.
| Specification | Detail |
|---|---|
| Engine | 5.8L V8 (351 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional |
| Viscosity | SAE 10W-30 or 5W-30 |
| Oil Change Interval | Every 3,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600 |
The 1983 Ford Bronco 5.8L V8 requires 6.0 quarts of SAE 10W-30 or 5W-30 oil with filter. This model year offered only V8 engine options.
1982 Ford Bronco Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 5.0L V8 (302 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional |
| Viscosity | SAE 10W-30 or 5W-30 |
| Oil Change Interval | Every 3,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600 |
The 1982 Ford Bronco 5.0L V8 uses 6.0 quarts of SAE 10W-30 or 5W-30 oil. The 5.0L V8 was one of two engine options for this model year.
| Specification | Detail |
|---|---|
| Engine | 5.8L V8 (351 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional |
| Viscosity | SAE 10W-30 or 5W-30 |
| Oil Change Interval | Every 3,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600 |
The 1982 Ford Bronco 5.8L V8 requires 6.0 quarts of SAE 10W-30 or 5W-30 oil with filter. The 5.8L Windsor V8 remained available alongside the 5.0L option.
1981 Ford Bronco Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 5.0L V8 (302 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional |
| Viscosity | SAE 10W-30 or 5W-30 |
| Oil Change Interval | Every 3,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600 |
The 1981 Ford Bronco 5.0L V8 uses 6.0 quarts of SAE 10W-30 or 5W-30 oil. The 5.0L V8 continued as the base engine option.
| Specification | Detail |
|---|---|
| Engine | 5.8L V8 (351 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional |
| Viscosity | SAE 10W-30 or 5W-30 |
| Oil Change Interval | Every 3,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600 |
The 1981 Ford Bronco 5.8L V8 requires 6.0 quarts of SAE 10W-30 or 5W-30 oil with filter. Both V8 engines used similar oil capacities and viscosity requirements.
1980 Ford Bronco Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 4.9L I6 (300 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional |
| Viscosity | SAE 10W-30 or 5W-30 |
| Oil Change Interval | Every 3,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600 |
The 1980 Ford Bronco 4.9L inline-six uses 6.0 quarts of SAE 10W-30 or 5W-30 oil. The inline-six was available in the early years of the fourth generation.
| Specification | Detail |
|---|---|
| Engine | 5.0L V8 (302 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional |
| Viscosity | SAE 10W-30 or 5W-30 |
| Oil Change Interval | Every 3,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600 |
The 1980 Ford Bronco 5.0L V8 requires 6.0 quarts of SAE 10W-30 or 5W-30 oil. This was the first year of the fourth-generation Bronco.
| Specification | Detail |
|---|---|
| Engine | 5.8L V8 (351 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional |
| Viscosity | SAE 10W-30 or 5W-30 |
| Oil Change Interval | Every 3,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600 |
The 1980 Ford Bronco 5.8L V8 uses 6.0 quarts of SAE 10W-30 or 5W-30 oil with filter. Multiple engine options were offered in the redesigned fourth-generation model.
1978-1979 Ford Bronco Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 5.8L V8 (351 cu in Modified) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional |
| Viscosity | SAE 10W-30 or 5W-30 |
| Oil Change Interval | Every 3,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600 |
The 1978-1979 Ford Bronco 5.8L V8 Modified engine uses 6.0 quarts of SAE 10W-30 or 5W-30 oil. The 351 Modified V8 was offered alongside the Windsor version during these years.
| Specification | Detail |
|---|---|
| Engine | 6.6L V8 (400 cu in) |
| Oil Capacity (with Filter) | 6.0 qt (5.68 L) |
| Oil Capacity (without Filter) | 5.0 qt (4.73 L) |
| Recommended Oil Type | Conventional |
| Viscosity | SAE 10W-30 or 5W-30 |
| Oil Change Interval | Every 3,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600 |
The 1978-1979 Ford Bronco 6.6L V8 (400 cu in) requires 6.0 quarts of SAE 10W-30 or 5W-30 oil with filter. The Ford 400 V8 produced 158 horsepower in 1978 and 156 horsepower in 1979.
1966-1977 Ford Bronco Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 170 cu in I6 |
| Oil Capacity (with Filter) | 5.0 qt (4.73 L) |
| Oil Capacity (without Filter) | 4.0 qt (3.79 L) |
| Recommended Oil Type | Conventional |
| Viscosity | SAE 10W-30 or 5W-30 |
| Oil Change Interval | Every 3,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600 |
The 1966-1977 Ford Bronco 170 cu in inline-six uses 5.0 quarts of SAE 10W-30 oil. The 105-horsepower inline-six was modified with a 6-quart oil pan and heavy-duty components.
| Specification | Detail |
|---|---|
| Engine | 200 cu in I6 |
| Oil Capacity (with Filter) | 5.0 qt (4.73 L) |
| Oil Capacity (without Filter) | 4.0 qt (3.79 L) |
| Recommended Oil Type | Conventional |
| Viscosity | SAE 10W-30 or 5W-30 |
| Oil Change Interval | Every 3,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600 |
The 1966-1977 Ford Bronco 200 cu in inline-six requires 5.0 quarts of SAE 10W-30 oil. The 200 cu in six-cylinder was an optional upgrade from the base 170 cu in engine.
| Specification | Detail |
|---|---|
| Engine | 289 cu in V8 |
| Oil Capacity (with Filter) | 5.0 qt (4.73 L) |
| Oil Capacity (without Filter) | 4.0 qt (3.79 L) |
| Recommended Oil Type | Conventional |
| Viscosity | SAE 10W-30 or 5W-30 |
| Oil Change Interval | Every 3,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600 |
The 1966-1977 Ford Bronco 289 cu in V8 uses 5.0 quarts of SAE 10W-30 oil with filter. The 289 V8 was offered as a performance upgrade option.
| Specification | Detail |
|---|---|
| Engine | 302 cu in V8 (5.0L) |
| Oil Capacity (with Filter) | 5.0 qt (4.73 L) |
| Oil Capacity (without Filter) | 4.0 qt (3.79 L) |
| Recommended Oil Type | Conventional |
| Viscosity | SAE 10W-30 or 5W-30 |
| Oil Change Interval | Every 3,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600 |
The 1966-1977 Ford Bronco 302 cu in V8 requires 5.0 quarts of SAE 10W-30 oil. The 302 V8 replaced the 289 in the engine lineup.
| Specification | Detail |
|---|---|
| Engine | 351 cu in V8 (5.8L) |
| Oil Capacity (with Filter) | 5.0 qt (4.73 L) |
| Oil Capacity (without Filter) | 4.0 qt (3.79 L) |
| Recommended Oil Type | Conventional |
| Viscosity | SAE 10W-30 or 5W-30 |
| Oil Change Interval | Every 3,000 miles or 6 months |
| Oil Drain Plug Torque | 15-25 lb-ft (20-34 N·m) |
| Recommended Filters | Motorcraft FL-1A, Fram PH3600 |
The 1966-1977 Ford Bronco 351 cu in V8 uses 5.0 quarts of SAE 10W-30 oil with filter. The 351 Windsor V8 was the largest engine option for early Bronco generations.
Oil Maintenance and Service Tips
Checking Oil Level
Check engine oil level regularly using the dipstick when the engine is cold and parked on level ground. The oil level should be between the minimum and maximum marks on the dipstick. Adding oil when the level is low prevents potential engine damage from inadequate lubrication.
Oil Change Best Practices
Modern Ford Bronco models with turbocharged engines require full synthetic oil meeting Ford specifications. Using the correct oil specification ensures proper turbocharger cooling and protection. Always replace the oil filter during each oil change to maintain clean oil circulation.
Torque Specifications
Modern Bronco models (2021-2025) require 20 lb-ft torque on the oil drain plug and 18 lb-ft on cartridge oil filter housings. Classic Bronco models typically use 15-25 lb-ft for drain plugs. Proper torque prevents leaks and damage to oil pan threads.
Severe Driving Conditions
Severe driving conditions include frequent short trips, towing, off-road driving, and dusty environments. Under these conditions, reduce oil change intervals to 5,000 miles instead of 7,500 miles for modern turbocharged engines. Classic Bronco models should follow 3,000-mile intervals for severe use.
When exploring Ford, don’t miss our detailed guides on popular models like the Ford F150 5.0, Ford Maverick, Ford Transit 150, and Ford Transit Connect. Understanding engine oil capacity is crucial for proper maintenance, and our expert resources explain the exact oil requirements for these models. You’ll also find insights on recommended oil types, service intervals, and common issues linked to incorrect oil levels, ensuring your Ford always delivers reliable performance.
Frequently Asked Questions
What kind of oil does a Ford Bronco use?
Modern Ford Bronco models (2021-2025) use full synthetic SAE 5W-30 oil meeting Ford WSS-M2C961-A1 specification for 2.3L and 2.7L engines. The Bronco Raptor requires SAE 5W-50 full synthetic oil meeting WSS-M2C931-E1 specification. Classic Broncos (1966-1996) use SAE 5W-30 conventional or synthetic blend oil.
How much oil does a Ford Bronco take?
The 2021-2025 Ford Bronco 2.3L engine takes 6.2 quarts with filter, while the 2.7L V6 takes 6.0 quarts. The Bronco Raptor 3.0L engine requires 5.7 quarts. Ford Bronco Sport models take 5.0-5.5 quarts depending on engine size. Classic Broncos typically use 5.0-6.0 quarts with filter.
What is the recommended oil type for a Ford Bronco?
Ford recommends full synthetic oil for all modern Bronco models (2021-2025) due to turbocharged engines. Motorcraft brand oil meeting Ford specifications is preferred for warranty compliance. Classic Bronco models can use conventional or synthetic blend oil.
What is the oil change interval for a Ford Bronco?
Modern Ford Bronco models have a recommended oil change interval of 7,500 miles or 12 months under normal driving conditions. Severe driving conditions require more frequent changes at 5,000-mile intervals. Classic Bronco models typically require oil changes every 3,000-5,000 miles.
Can I use 5W-20 instead of 5W-30 in my Ford Bronco?
Using 5W-20 instead of the recommended 5W-30 in modern Bronco turbocharged engines is not recommended. The incorrect viscosity may not provide adequate protection under high-temperature turbocharged conditions. Always use the viscosity specified in your owner’s manual for optimal engine protection.
What oil filter does a Ford Bronco use?
The 2021-2025 Ford Bronco 2.3L uses Motorcraft FL-910-S spin-on filter. The 2.7L and 3.0L Raptor engines use Motorcraft FL-2062-A cartridge filter. Bronco Sport models use FL-910-S for 1.5L and FL-500-S for 2.0L engines. Classic Broncos typically use Motorcraft FL-1A filters.
Conclusion
The Ford Bronco requires specific oil capacities, viscosity grades, and types depending on model year and engine configuration. Modern turbocharged Bronco models (2021-2025) require full synthetic SAE 5W-30 or 5W-50 oil meeting Ford specifications. Classic Broncos (1966-1996) use SAE 5W-30 or 10W-30 conventional or synthetic blend oil.
Using manufacturer-approved oil specifications ensures optimal engine protection and performance across all operating conditions. Regular oil changes at recommended intervals prevent premature engine wear and maintain turbocharger longevity in modern models. Following proper maintenance procedures with correct oil capacity and filter replacement maximizes engine reliability and vehicle longevity.
