Valve Clearance, also known as valve lash, is the small gap between specific components of an engine’s valve operating mechanism when the valve is fully closed. This clearance allows engine components to expand as temperatures increase while ensuring that the intake and exhaust valves open and close correctly.
Proper valve clearance is essential for maintaining engine performance, efficient combustion, fuel economy, and reliable operation. Incorrect clearance can cause unusual engine noises, reduced power, poor starting, and premature wear of valve train components.
Understanding valve clearance helps vehicle owners recognize engine maintenance requirements and identify potential mechanical problems before they become serious.
Quick Navigation
What Is Valve Clearance?
Valve clearance refers to the specified gap within the valve train of an internal combustion engine, commonly measured between a rocker arm and valve stem or between a camshaft lobe and its follower.
The exact measurement point depends on the engine’s valve train design.
During engine operation, metal components expand because of heat. The clearance accommodates these dimensional changes and helps the valves seat properly.
Manufacturers such as Kia and Honda specify valve clearance requirements and adjustment procedures for engines that use manually adjustable valve trains.
Not all engines require periodic valve clearance adjustment. Some use hydraulic lash adjusters that automatically compensate for normal clearance changes.
How Does Valve Clearance Work?
An engine uses intake and exhaust valves to control the movement of gases into and out of its cylinders.
The camshaft operates these valves through components such as rocker arms, tappets, or cam followers.
When a camshaft lobe rotates into position, it pushes the valve operating mechanism and opens the corresponding valve.
As the camshaft continues rotating, the valve spring closes the valve.
In mechanically adjusted valve trains, a small clearance is maintained at a specified point when the valve is closed.
This gap helps compensate for thermal expansion and ensures that the valve can fully seat under normal operating conditions.
The correct clearance varies according to engine design, valve location, and manufacturer specifications.
Types of Valve Clearance
Valve clearance requirements differ depending on the valve train configuration.
1. Intake Valve Clearance
Intake valves control the entry of air or an air-fuel mixture into the combustion chamber.
Their clearance requirements depend on the materials, operating temperatures, and mechanical design of the engine.
2. Exhaust Valve Clearance
Exhaust valves release combustion gases from the cylinder.
Because exhaust valves experience higher temperatures, their specified clearance may differ from that of intake valves.
3. Hydraulic Valve Lash Adjustment
Some engines use hydraulic lash adjusters rather than manually specified operating gaps.
These components use pressurized oil to compensate for normal changes in valve train clearance.
They generally eliminate routine manual adjustment, although hydraulic components can still malfunction.
What Happens When Valve Clearance Is Too Tight?
Insufficient valve clearance can prevent a valve from closing completely as engine components expand.
This may cause several problems:
- Loss of compression: An incompletely seated valve allows combustion pressure to escape.
- Hard starting: Reduced compression can interfere with normal engine starting.
- Rough idling: Incorrect valve sealing can disrupt combustion.
- Reduced engine power: Poor cylinder sealing affects performance.
- Burned valves: Hot combustion gases escaping past a valve can damage its seating surfaces.
Tight valve clearance may not produce a noticeable ticking sound, making it difficult to identify without measurement.
What Happens When Valve Clearance Is Too Loose?
Excessive valve clearance introduces unnecessary movement before the valve operating mechanism begins opening the valve.
Common symptoms include:
- Ticking or tapping noises: Excessive mechanical clearance can produce repetitive sounds.
- Reduced valve lift: Excessive lash can decrease effective valve opening.
- Altered valve timing: Valves may open later and close earlier than intended.
- Reduced performance: Changes in valve operation can affect engine breathing.
- Valve train wear: Repeated impacts may accelerate wear of contacting components.
However, ticking sounds can also result from fuel injectors, lubrication problems, or other mechanical components.
How Is Valve Clearance Measured?
Valve clearance is commonly measured using a feeler gauge, which contains thin metal blades of precisely known thickness.
For engines requiring manual adjustment, technicians generally follow these steps:
- Prepare the engine according to the manufacturer’s temperature requirements.
- Remove the necessary valve cover or access components.
- Position the camshaft so the valve being measured is fully closed.
- Insert the appropriate feeler gauge at the specified measurement point.
- Compare the measured gap with manufacturer specifications.
- Adjust the clearance if necessary using the prescribed procedure.
Some engines use adjustment screws, while others require replacing calibrated shims or components.
What Is the Correct Valve Clearance?
There is no universal valve clearance specification for all engines.
Some engines use clearances measured in fractions of a millimeter, but the correct values depend on engine design and whether measurements are performed hot or cold.
For example, one engine may specify a clearance of 0.20 mm, while another requires a different setting.
Technicians must follow the applicable service manual rather than assuming that a commonly used measurement is suitable.
When Should Valve Clearance Be Adjusted?
Valve clearance should be inspected or adjusted at the intervals specified by the manufacturer or when diagnostic symptoms justify testing.
Drivers in Minnesota may experience demanding cold-start conditions during winter, while vehicle owners in Nebraska may encounter significant seasonal temperature changes.
However, climate alone does not establish a need for valve adjustment. Maintenance requirements depend primarily on the engine’s design, condition, and service schedule.
Valve Clearance vs. Valve Timing
Valve clearance and valve timing are related but different engine characteristics.
Valve clearance describes the mechanical gap within the valve operating system.
Valve timing describes when intake and exhaust valves open and close relative to crankshaft position.
Incorrect clearance can influence effective valve operation, but adjusting clearance is not the same as changing camshaft timing.
