The Dodge Challenger was produced from 2008 to 2023 in its third generation, offering multiple engine options ranging from V6 to supercharged V8 configurations. Using the correct oil capacity, viscosity, and type is essential for maintaining engine performance and longevity. This guide lists all model years with complete oil specifications and maintenance recommendations.
Different engine configurations require specific oil types and capacities to ensure proper lubrication and protection. The specifications vary significantly between the 3.6L V6, 5.7L Hemi V8, 6.1L Hemi V8, 6.4L 392 Hemi V8, and 6.2L supercharged Hemi V8 engines.
Quick Navigation
2023 Dodge Challenger Engine Oil Capacity
3.6L Pentastar V6
| Specification | Detail |
|---|---|
| Engine | 3.6L Pentastar V6 |
| Oil Capacity (with Filter) | 6 qt (5.7 L) |
| Oil Capacity (without Filter) | 5.5 qt (5.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 10,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-339, Mobil 1 M1-110A, K&N HP-1008 |
The 2023 Dodge Challenger with the 3.6L Pentastar V6 requires 6 quarts of SAE 5W-20 full synthetic oil with filter. This viscosity provides optimal protection and efficiency under normal driving conditions.
5.7L Hemi V8
| Specification | Detail |
|---|---|
| Engine | 5.7L Hemi V8 |
| Oil Capacity (with Filter) | 7 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 0W-20 |
| Oil Change Interval | Every 10,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-339, Mobil 1 M1-110A, Fram XG7317 |
The 2023 Challenger R/T uses a 5.7L Hemi V8 that requires 7 quarts of SAE 0W-20 full synthetic oil. The newer 0W-20 viscosity was introduced for 2022-2023 models to improve fuel efficiency.
6.4L 392 Hemi V8
| Specification | Detail |
|---|---|
| Engine | 6.4L 392 Hemi V8 |
| Oil Capacity (with Filter) | 7 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 0W-40 |
| Oil Change Interval | Every 6,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-090, Mobil 1 M1-113A, K&N HP-1017 |
The 2023 Challenger Scat Pack and 392 models use a 6.4L Hemi V8 requiring 7 quarts of SAE 0W-40 full synthetic oil. This higher viscosity oil is specified for the increased performance demands of the 392 engine.
6.2L Supercharged Hemi V8 (Hellcat)
| Specification | Detail |
|---|---|
| Engine | 6.2L Supercharged Hemi V8 |
| Oil Capacity (with Filter) | 7 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 0W-40 |
| Oil Change Interval | Every 6,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-899, Mobil 1 M1-113A |
The 2023 Challenger SRT Hellcat uses a supercharged 6.2L Hemi V8 that requires 7 quarts of Pennzoil Ultra 0W-40 or equivalent meeting Chrysler MS-12633 specification. Using the correct oil specification is critical for supercharged engine protection.
2022 Dodge Challenger Engine Oil Capacity
3.6L Pentastar V6
| Specification | Detail |
|---|---|
| Engine | 3.6L Pentastar V6 |
| Oil Capacity (with Filter) | 6 qt (5.7 L) |
| Oil Capacity (without Filter) | 5.5 qt (5.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 10,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-339, Mobil 1 M1-110A, K&N HP-1008 |
The 2022 Dodge Challenger SXT uses a 3.6L V6 producing 303 horsepower and requires 6 quarts of SAE 5W-20 full synthetic oil. The Pentastar V6 uses Chrysler MS-6395 specification oil for optimal performance.
5.7L Hemi V8
| Specification | Detail |
|---|---|
| Engine | 5.7L Hemi V8 |
| Oil Capacity (with Filter) | 7 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 0W-20 |
| Oil Change Interval | Every 10,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-339, Mobil 1 M1-110A, Fram XG7317 |
The 2022 Challenger R/T with 5.7L Hemi V8 requires 7 quarts of SAE 0W-20 full synthetic oil meeting MS-6395 specification. Starting in 2022, Dodge transitioned from 5W-20 to 0W-20 for improved cold-start protection.
6.4L 392 Hemi V8
| Specification | Detail |
|---|---|
| Engine | 6.4L 392 Hemi V8 |
| Oil Capacity (with Filter) | 7 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 0W-40 |
| Oil Change Interval | Every 6,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-090, Mobil 1 M1-113A, K&N HP-1017 |
The 2022 Challenger with 6.4L 392 Hemi V8 uses 7 quarts of SAE 0W-40 full synthetic oil meeting Chrysler MS-12633 specification. This oil provides maximum protection for high-performance driving conditions.
6.2L Supercharged Hemi V8 (Hellcat/Redeye)
| Specification | Detail |
|---|---|
| Engine | 6.2L Supercharged Hemi V8 |
| Oil Capacity (with Filter) | 7 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 0W-40 |
| Oil Change Interval | Every 6,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-899, Mobil 1 M1-113A |
The 2022 Challenger SRT Hellcat and Redeye models use 7 quarts of Pennzoil Ultra 0W-40 or equivalent Mopar oil meeting MS-12633. The supercharged 6.2L engine produces up to 797 horsepower in Redeye configuration.
2021 Dodge Challenger Engine Oil Capacity
3.6L Pentastar V6
| Specification | Detail |
|---|---|
| Engine | 3.6L Pentastar V6 |
| Oil Capacity (with Filter) | 6 qt (5.7 L) |
| Oil Capacity (without Filter) | 5.5 qt (5.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 10,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-339, Mobil 1 M1-110A, K&N HP-1008 |
The 2021 Dodge Challenger with 3.6L Pentastar V6 requires 6 quarts of SAE 5W-20 full synthetic oil. This engine uses Chrysler MS-6395 specification for proper Multi-Displacement System operation.
5.7L Hemi V8
| Specification | Detail |
|---|---|
| Engine | 5.7L Hemi V8 |
| Oil Capacity (with Filter) | 7 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 10,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-339, Mobil 1 M1-110A, Fram XG7317 |
The 2021 Challenger R/T uses a 5.7L Hemi V8 requiring 7 quarts of SAE 5W-20 full synthetic oil. This viscosity ensures proper lubrication and supports the Multi-Displacement System for fuel efficiency.
6.4L 392 Hemi V8
| Specification | Detail |
|---|---|
| Engine | 6.4L 392 Hemi V8 |
| Oil Capacity (with Filter) | 7 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 0W-40 |
| Oil Change Interval | Every 6,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-090, Mobil 1 M1-113A, K&N HP-1017 |
The 2021 Challenger Scat Pack uses 7 quarts of SAE 0W-40 full synthetic oil meeting MS-12633 specification. The 6.4L 392 Hemi produces 485 horsepower and requires premium oil for protection.
6.2L Supercharged Hemi V8 (Hellcat)
| Specification | Detail |
|---|---|
| Engine | 6.2L Supercharged Hemi V8 |
| Oil Capacity (with Filter) | 7 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 0W-40 |
| Oil Change Interval | Every 6,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-899, Mobil 1 M1-113A |
The 2021 Challenger SRT Hellcat requires 7 quarts of Pennzoil Ultra 0W-40 full synthetic oil. Check oil level after adding 6.5 quarts and top off as needed to proper level.
2020 Dodge Challenger Engine Oil Capacity
3.6L Pentastar V6
| Specification | Detail |
|---|---|
| Engine | 3.6L Pentastar V6 |
| Oil Capacity (with Filter) | 6 qt (5.7 L) |
| Oil Capacity (without Filter) | 5.5 qt (5.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 10,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-339, Mobil 1 M1-110A, K&N HP-1008 |
The 2020 Dodge Challenger SXT with 3.6L V6 uses 6 quarts of SAE 5W-20 full synthetic oil. Synthetic oil should be changed every 7,500 to 10,000 miles for this engine.
5.7L Hemi V8
| Specification | Detail |
|---|---|
| Engine | 5.7L Hemi V8 |
| Oil Capacity (with Filter) | 7 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 10,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-339, Mobil 1 M1-110A, Fram XG7317 |
The 2020 Challenger R/T requires 7 quarts of SAE 5W-20 full synthetic oil meeting MS-6395 specification. The 5.7L Hemi provides 375 horsepower with proper oil maintenance.
6.4L 392 Hemi V8
| Specification | Detail |
|---|---|
| Engine | 6.4L 392 Hemi V8 |
| Oil Capacity (with Filter) | 7 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 0W-40 |
| Oil Change Interval | Every 6,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-090, Mobil 1 M1-113A, K&N HP-1017 |
The 2020 Challenger with 6.4L engine uses 7 quarts of SAE 0W-40 full synthetic oil. The 392 Hemi requires premium 91 octane fuel and 0W-40 oil for optimal performance.
6.2L Supercharged Hemi V8 (Hellcat)
| Specification | Detail |
|---|---|
| Engine | 6.2L Supercharged Hemi V8 |
| Oil Capacity (with Filter) | 7 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 0W-40 |
| Oil Change Interval | Every 6,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-899, Mobil 1 M1-113A |
The 2020 Challenger SRT Hellcat uses 7 quarts of Pennzoil Ultra 0W-40 synthetic oil meeting MS-12633. The supercharged engine demands high-quality oil for maximum protection under boost.
2019 Dodge Challenger Engine Oil Capacity
3.6L Pentastar V6
| Specification | Detail |
|---|---|
| Engine | 3.6L Pentastar V6 |
| Oil Capacity (with Filter) | 6 qt (5.7 L) |
| Oil Capacity (without Filter) | 5.5 qt (5.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 10,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-339, Mobil 1 M1-110A, K&N HP-1008 |
The 2019 Dodge Challenger with 3.6L V6 requires 6 quarts of SAE 5W-20 full synthetic oil. Using API certified oil meeting MS-6395 specification ensures proper engine protection.
5.7L Hemi V8
| Specification | Detail |
|---|---|
| Engine | 5.7L Hemi V8 |
| Oil Capacity (with Filter) | 7 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 10,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-339, Mobil 1 M1-110A, Fram XG7317 |
The 2019 Challenger R/T uses 7 quarts of SAE 5W-20 full synthetic oil for the 5.7L Hemi engine. This oil capacity includes a full filter replacement during service.
6.4L 392 Hemi V8
| Specification | Detail |
|---|---|
| Engine | 6.4L 392 Hemi V8 |
| Oil Capacity (with Filter) | 7 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 0W-40 |
| Oil Change Interval | Every 6,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-090, Mobil 1 M1-113A, K&N HP-1017 |
The 2019 Challenger Scat Pack requires 7 quarts of SAE 0W-40 synthetic oil meeting MS-12633. The 6.4L engine produces 485 horsepower with Variable Valve Timing.
6.2L Supercharged Hemi V8 (Hellcat/Demon)
| Specification | Detail |
|---|---|
| Engine | 6.2L Supercharged Hemi V8 |
| Oil Capacity (with Filter) | 7 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 0W-40 |
| Oil Change Interval | Every 6,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-899, Mobil 1 M1-113A |
The 2019 Challenger SRT Hellcat uses 7 quarts of Pennzoil Ultra 0W-40 oil meeting MS-12633 specification. The supercharged 6.2L delivers 717 horsepower in Hellcat trim.
2018 Dodge Challenger Engine Oil Capacity
3.6L Pentastar V6
| Specification | Detail |
|---|---|
| Engine | 3.6L Pentastar V6 |
| Oil Capacity (with Filter) | 6 qt (5.7 L) |
| Oil Capacity (without Filter) | 5.5 qt (5.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 10,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-339, Mobil 1 M1-110A, K&N HP-1008 |
The 2018 Dodge Challenger SXT with 3.6L V6 uses 6 quarts of SAE 5W-20 full synthetic oil. The Pentastar V6 delivers 305 horsepower with proper oil maintenance.
5.7L Hemi V8
| Specification | Detail |
|---|---|
| Engine | 5.7L Hemi V8 |
| Oil Capacity (with Filter) | 7 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 10,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-339, Mobil 1 M1-110A, Fram XG7317 |
The 2018 Challenger R/T requires 7 quarts of SAE 5W-20 full synthetic oil for the 5.7L Hemi. Regular oil changes maintain the Multi-Displacement System functionality.
6.4L 392 Hemi V8
| Specification | Detail |
|---|---|
| Engine | 6.4L 392 Hemi V8 |
| Oil Capacity (with Filter) | 7 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 0W-40 |
| Oil Change Interval | Every 6,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-090, Mobil 1 M1-113A, K&N HP-1017 |
The 2018 Challenger with 6.4L 392 engine uses 7 quarts of SAE 0W-40 full synthetic oil. This high-performance engine requires premium oil meeting MS-12633 specification.
6.2L Supercharged Hemi V8 (Hellcat/Demon)
| Specification | Detail |
|---|---|
| Engine | 6.2L Supercharged Hemi V8 |
| Oil Capacity (with Filter) | 7 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 0W-40 |
| Oil Change Interval | Every 6,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-899, Mobil 1 M1-113A |
The 2018 Challenger SRT Hellcat and Demon use 7 quarts of Pennzoil Ultra 0W-40 synthetic oil. The Demon produces 840 horsepower with proper lubrication.
2017 Dodge Challenger Engine Oil Capacity
3.6L Pentastar V6
| Specification | Detail |
|---|---|
| Engine | 3.6L Pentastar V6 |
| Oil Capacity (with Filter) | 6 qt (5.7 L) |
| Oil Capacity (without Filter) | 5.5 qt (5.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 10,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-339, Mobil 1 M1-110A, K&N HP-1008 |
The 2017 Dodge Challenger with 3.6L V6 requires 6 quarts of SAE 5W-20 full synthetic oil. Mopar, Pennzoil, and Shell Helix meet the required MS-6395 specification.
5.7L Hemi V8
| Specification | Detail |
|---|---|
| Engine | 5.7L Hemi V8 |
| Oil Capacity (with Filter) | 7 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 10,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-339, Mobil 1 M1-110A, Fram XG7317 |
The 2017 Challenger R/T uses 7 quarts of SAE 5W-20 full synthetic oil meeting MS-6395 specification. The 5.7L Hemi engine features Variable Valve Timing and Fuel Saver Technology.
6.4L 392 Hemi V8
| Specification | Detail |
|---|---|
| Engine | 6.4L 392 Hemi V8 |
| Oil Capacity (with Filter) | 7 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 0W-40 |
| Oil Change Interval | Every 6,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-090, Mobil 1 M1-113A, K&N HP-1017 |
The 2017 Challenger Scat Pack requires 7 quarts of SAE 0W-40 synthetic oil. Pennzoil Ultra 0W-40 or equivalent Mopar oil meeting MS-12633 is specified.
6.2L Supercharged Hemi V8 (Hellcat)
| Specification | Detail |
|---|---|
| Engine | 6.2L Supercharged Hemi V8 |
| Oil Capacity (with Filter) | 7 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 0W-40 |
| Oil Change Interval | Every 6,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-899, Mobil 1 M1-113A |
The 2017 Challenger SRT Hellcat uses 7 quarts of Pennzoil Ultra 0W-40 full synthetic oil. The supercharged 6.2L engine requires oil meeting MS-12633 specification for all operating temperatures.
2016 Dodge Challenger Engine Oil Capacity
3.6L Pentastar V6
| Specification | Detail |
|---|---|
| Engine | 3.6L Pentastar V6 |
| Oil Capacity (with Filter) | 6 qt (5.7 L) |
| Oil Capacity (without Filter) | 5.5 qt (5.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 10,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-339, Mobil 1 M1-110A, K&N HP-1008 |
The 2016 Dodge Challenger SXT uses 6 quarts of SAE 5W-20 full synthetic oil meeting MS-6395. The 3.6L Pentastar V6 produces 305 horsepower with proper lubrication.
5.7L Hemi V8
| Specification | Detail |
|---|---|
| Engine | 5.7L Hemi V8 |
| Oil Capacity (with Filter) | 7 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 10,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-339, Mobil 1 M1-110A, Fram XG7317 |
The 2016 Challenger R/T requires 7 quarts of SAE 5W-20 full synthetic oil. Check the oil filler cap for the correct SAE grade specification.
6.4L 392 Hemi V8
| Specification | Detail |
|---|---|
| Engine | 6.4L 392 Hemi V8 |
| Oil Capacity (with Filter) | 7 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 0W-40 |
| Oil Change Interval | Every 6,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-090, Mobil 1 M1-113A, K&N HP-1017 |
The 2016 Challenger with 6.4L 392 Hemi uses 7 quarts of SAE 0W-40 full synthetic oil. The factory oil fill for this engine is Pennzoil Ultra 0W-40 synthetic.
6.2L Supercharged Hemi V8 (Hellcat)
| Specification | Detail |
|---|---|
| Engine | 6.2L Supercharged Hemi V8 |
| Oil Capacity (with Filter) | 7 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 0W-40 |
| Oil Change Interval | Every 6,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-899, Mobil 1 M1-113A |
The 2016 Challenger SRT Hellcat requires 7 quarts of Pennzoil Ultra 0W-40 synthetic oil. Add approximately 6.5 quarts and check dipstick before topping off to proper level.
2015 Dodge Challenger Engine Oil Capacity
3.6L Pentastar V6
| Specification | Detail |
|---|---|
| Engine | 3.6L Pentastar V6 |
| Oil Capacity (with Filter) | 6 qt (5.7 L) |
| Oil Capacity (without Filter) | 5.5 qt (5.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 10,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-339, Mobil 1 M1-110A, K&N HP-1008 |
The 2015 Dodge Challenger with 3.6L V6 uses 6 quarts of SAE 5W-20 full synthetic oil. This was the first year of the redesigned third-generation Challenger.
5.7L Hemi V8
| Specification | Detail |
|---|---|
| Engine | 5.7L Hemi V8 |
| Oil Capacity (with Filter) | 7 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 10,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-339, Mobil 1 M1-110A, Fram XG7317 |
The 2015 Challenger R/T requires 7 quarts of SAE 5W-20 full synthetic oil meeting MS-6395. The 5.7L Hemi engine produces 375 horsepower.
6.4L 392 Hemi V8
| Specification | Detail |
|---|---|
| Engine | 6.4L 392 Hemi V8 |
| Oil Capacity (with Filter) | 7 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 0W-40 |
| Oil Change Interval | Every 6,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-090, Mobil 1 M1-113A, K&N HP-1017 |
The 2015 Challenger Scat Pack uses 7 quarts of SAE 0W-40 full synthetic oil. The 6.4L engine requires premium 89 octane fuel and 0W-40 oil.
6.2L Supercharged Hemi V8 (Hellcat)
| Specification | Detail |
|---|---|
| Engine | 6.2L Supercharged Hemi V8 |
| Oil Capacity (with Filter) | 7 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 0W-40 |
| Oil Change Interval | Every 6,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-899, Mobil 1 M1-113A |
The 2015 Challenger SRT Hellcat uses 6 quarts of Pennzoil Ultra 0W-40 synthetic oil meeting MS-12633. This was the debut year for the supercharged Hellcat producing 707 horsepower.
2014 Dodge Challenger Engine Oil Capacity
3.6L Pentastar V6
| Specification | Detail |
|---|---|
| Engine | 3.6L Pentastar V6 |
| Oil Capacity (with Filter) | 6 qt (5.7 L) |
| Oil Capacity (without Filter) | 5.5 qt (5.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 10,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-339, Mobil 1 M1-110A, K&N HP-1008 |
The 2014 Dodge Challenger SXT with 3.6L V6 requires 6 quarts of SAE 5W-20 full synthetic oil. The oil capacity is 5.6 liters or 5.9 quarts with filter replacement.
5.7L Hemi V8
| Specification | Detail |
|---|---|
| Engine | 5.7L Hemi V8 |
| Oil Capacity (with Filter) | 7 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 10,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-339, Mobil 1 M1-110A, Fram XG7317 |
The 2014 Challenger R/T uses 7 quarts of SAE 5W-20 full synthetic oil meeting MS-6395 specification. The 5.7L Hemi features Variable Valve Timing and Fuel Saver Technology.
6.4L 392 Hemi V8
| Specification | Detail |
|---|---|
| Engine | 6.4L 392 Hemi V8 |
| Oil Capacity (with Filter) | 7 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 0W-40 |
| Oil Change Interval | Every 6,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-090, Mobil 1 M1-113A, K&N HP-1017 |
The 2014 Challenger SRT with 6.4L engine requires 7 quarts of SAE 0W-40 full synthetic oil. The 2014 model specifies API SN 0W-40 meeting Chrysler MS-12633.
2013 Dodge Challenger Engine Oil Capacity
3.6L Pentastar V6
| Specification | Detail |
|---|---|
| Engine | 3.6L Pentastar V6 |
| Oil Capacity (with Filter) | 6 qt (5.7 L) |
| Oil Capacity (without Filter) | 5.5 qt (5.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 10,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-339, Mobil 1 M1-110A, K&N HP-1008 |
The 2013 Dodge Challenger with 3.6L Pentastar V6 uses 6 quarts of SAE 5W-20 full synthetic oil. The Pentastar V6 replaced the older 3.5L V6 in 2011.
5.7L Hemi V8
| Specification | Detail |
|---|---|
| Engine | 5.7L Hemi V8 |
| Oil Capacity (with Filter) | 7 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 10,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-339, Mobil 1 M1-110A, Fram XG7317 |
The 2013 Challenger R/T requires 7 quarts of SAE 5W-20 full synthetic oil. The 5.7L Hemi engine produces 375 horsepower with Variable Valve Timing.
6.4L 392 Hemi V8
| Specification | Detail |
|---|---|
| Engine | 6.4L 392 Hemi V8 |
| Oil Capacity (with Filter) | 7 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 0W-40 |
| Oil Change Interval | Every 6,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-090, Mobil 1 M1-113A, K&N HP-1017 |
The 2013 Challenger SRT8 392 uses 7 quarts of SAE 0W-40 full synthetic oil. The 6.4L 392 Hemi produces 470 horsepower and 470 lb-ft of torque.
2012 Dodge Challenger Engine Oil Capacity
3.6L Pentastar V6
| Specification | Detail |
|---|---|
| Engine | 3.6L Pentastar V6 |
| Oil Capacity (with Filter) | 6 qt (5.7 L) |
| Oil Capacity (without Filter) | 5.5 qt (5.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 10,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-339, Mobil 1 M1-110A, K&N HP-1008 |
The 2012 Dodge Challenger SXT with 3.6L Pentastar V6 requires 6 quarts of SAE 5W-20 full synthetic oil. The Pentastar V6 delivers improved fuel economy compared to previous V6 engines.
5.7L Hemi V8
| Specification | Detail |
|---|---|
| Engine | 5.7L Hemi V8 |
| Oil Capacity (with Filter) | 7 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 10,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-339, Mobil 1 M1-110A, Fram XG7317 |
The 2012 Challenger R/T uses 7 quarts of SAE 5W-20 full synthetic oil meeting MS-6395. The oil capacity includes a new filter during oil change service.
6.4L 392 Hemi V8
| Specification | Detail |
|---|---|
| Engine | 6.4L 392 Hemi V8 |
| Oil Capacity (with Filter) | 7 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-40 |
| Oil Change Interval | Every 6,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-090, Mobil 1 M1-113A, K&N HP-1017 |
The 2012 Challenger SRT8 392 requires 7 quarts of SAE 5W-40 synthetic oil. The factory oil fill for 2012 models was 5W-40 synthetic before switching to 0W-40 in later years.
2011 Dodge Challenger Engine Oil Capacity
3.6L Pentastar V6
| Specification | Detail |
|---|---|
| Engine | 3.6L Pentastar V6 |
| Oil Capacity (with Filter) | 6 qt (5.7 L) |
| Oil Capacity (without Filter) | 5.5 qt (5.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 10,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-339, Mobil 1 M1-110A, K&N HP-1008 |
The 2011 Dodge Challenger SXT introduced the new 3.6L Pentastar V6 requiring 6 quarts of SAE 5W-20 oil. This was the first year for the Pentastar engine in the Challenger.
5.7L Hemi V8
| Specification | Detail |
|---|---|
| Engine | 5.7L Hemi V8 |
| Oil Capacity (with Filter) | 7 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 10,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-339, Mobil 1 M1-110A, Fram XG7317 |
The 2011 Challenger R/T uses 7 quarts of SAE 5W-20 full synthetic oil. The 5.7L Hemi produces 375 horsepower with proper oil maintenance.
6.4L 392 Hemi V8
| Specification | Detail |
|---|---|
| Engine | 6.4L 392 Hemi V8 |
| Oil Capacity (with Filter) | 7 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-40 |
| Oil Change Interval | Every 6,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-090, Mobil 1 M1-113A, K&N HP-1017 |
The 2011 Challenger SRT8 392 introduced the new 6.4L engine requiring 7 quarts of SAE 5W-40 synthetic oil. This was the debut year for the 392 Hemi producing 470 horsepower.
2010 Dodge Challenger Engine Oil Capacity
3.5L V6
| Specification | Detail |
|---|---|
| Engine | 3.5L V6 |
| Oil Capacity (with Filter) | 6 qt (5.7 L) |
| Oil Capacity (without Filter) | 5.5 qt (5.2 L) |
| Recommended Oil Type | Synthetic Blend |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 6,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-339, Mobil 1 M1-110A, K&N HP-1008 |
The 2010 Dodge Challenger SE with 3.5L V6 uses 6 quarts of SAE 5W-20 oil. This was the last year for the 3.5L V6 before the Pentastar replacement.
5.7L Hemi V8
| Specification | Detail |
|---|---|
| Engine | 5.7L Hemi V8 |
| Oil Capacity (with Filter) | 7 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 6,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-339, Mobil 1 M1-110A, Fram XG7317 |
The 2010 Challenger R/T requires 7 quarts of SAE 5W-20 oil for the 5.7L Hemi engine. The oil capacity includes a dry filter replacement.
6.1L Hemi V8 SRT8
| Specification | Detail |
|---|---|
| Engine | 6.1L Hemi V8 SRT8 |
| Oil Capacity (with Filter) | 7 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 0W-40 |
| Oil Change Interval | Every 6,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-090, Mobil 1 M1-113A |
The 2010 Challenger SRT8 uses 7 quarts of SAE 0W-40 full synthetic oil. This was the final year for the 6.1L Hemi before the 6.4L 392 replacement.
2009 Dodge Challenger Engine Oil Capacity
2.7L V6
| Specification | Detail |
|---|---|
| Engine | 2.7L V6 |
| Oil Capacity (with Filter) | 5 qt (4.7 L) |
| Oil Capacity (without Filter) | 4.5 qt (4.3 L) |
| Recommended Oil Type | Synthetic Blend |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 6,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-339, Mobil 1 M1-110A |
The 2009 Dodge Challenger SE with 2.7L V6 requires 5 quarts of SAE 5W-20 oil. The 2.7L engine was offered only in 2009 as a base option.
3.5L V6
| Specification | Detail |
|---|---|
| Engine | 3.5L V6 |
| Oil Capacity (with Filter) | 6 qt (5.7 L) |
| Oil Capacity (without Filter) | 5.5 qt (5.2 L) |
| Recommended Oil Type | Synthetic Blend |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 6,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-339, Mobil 1 M1-110A, K&N HP-1008 |
The 2009 Challenger SE with 3.5L V6 uses 6 quarts of SAE 5W-20 oil. This engine was standard on most base models in 2009.
5.7L Hemi V8
| Specification | Detail |
|---|---|
| Engine | 5.7L Hemi V8 |
| Oil Capacity (with Filter) | 7 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 6,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-339, Mobil 1 M1-110A, Fram XG7317 |
The 2009 Challenger R/T requires 7 quarts of SAE 5W-20 oil for the 5.7L Hemi. The 5.7L Hemi produces 372 horsepower in 2009 models.
6.1L Hemi V8 SRT8
| Specification | Detail |
|---|---|
| Engine | 6.1L Hemi V8 SRT8 |
| Oil Capacity (with Filter) | 7 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 0W-40 |
| Oil Change Interval | Every 6,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-090, Mobil 1 M1-113A |
The 2009 Challenger SRT8 uses 7 quarts of SAE 0W-40 full synthetic oil. The 6.1L Hemi produces 425 horsepower with proper lubrication.
2008 Dodge Challenger Engine Oil Capacity
6.1L Hemi V8 SRT8
| Specification | Detail |
|---|---|
| Engine | 6.1L Hemi V8 SRT8 |
| Oil Capacity (with Filter) | 7 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-40 |
| Oil Change Interval | Every 6,000 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-090, Mobil 1 M1-113A |
The 2008 Dodge Challenger SRT8 was offered exclusively with the 6.1L Hemi V8 requiring 7 quarts of SAE 5W-40 oil. All 2008 models were limited edition SRT8s producing 425 horsepower. The engine oil specification for 2008 models was 5W-40 meeting Chrysler MS-6395 standards.
Oil Maintenance and Service Tips
Checking and maintaining proper oil levels is essential for Dodge Challenger engine longevity and performance. Always check oil level with the engine off on level ground, waiting at least five minutes after shutdown for oil to drain into the pan. The dipstick should show oil level between the minimum and maximum marks.
Change oil according to the Oil Change Indicator System or at the recommended mileage interval, whichever comes first. Synthetic oil provides superior protection and allows extended drain intervals compared to conventional oil. For severe driving conditions including frequent short trips, dusty environments, or track use, reduce oil change intervals by 50 percent.
Always replace the oil filter during each oil change to maintain proper filtration. Use high-quality oil filters meeting OEM specifications, such as Mopar filters or equivalents from Mobil 1, K&N, or Fram. Torque the oil drain plug to 20 lb-ft (27 N·m) to prevent leaks and avoid stripping threads.
| Driving Condition | Oil Change Interval |
|---|---|
| Normal Driving | 10,000 miles or 12 months |
| Severe Driving | 5,000 miles or 6 months |
| Track Use | 3,000 miles or 3 months |
| Supercharged Engines | 6,000 miles or 12 months |
When exploring Dodge, don’t miss our detailed guides on popular models like the Dodge Viper, Dodge Grand Caravan, Dodge Charger, and Dodge Caliber. Understanding engine oil capacity is crucial for proper maintenance, and our expert resources explain the exact oil requirements for these models. You’ll also find insights on recommended oil types, service intervals, and common issues linked to incorrect oil levels, ensuring your Dodge always delivers reliable performance.
Frequently Asked Questions
What kind of oil does a Dodge Challenger use?
Most Dodge Challenger models use full synthetic oil meeting Chrysler specifications MS-6395 or MS-12633. The 3.6L V6 and 5.7L Hemi V8 engines require SAE 5W-20 or 0W-20 full synthetic oil, while the 6.4L and 6.2L high-performance engines require SAE 0W-40 full synthetic oil. Always verify the correct specification on the oil filler cap or owner’s manual.
How much oil does a Dodge Challenger take?
The Dodge Challenger oil capacity ranges from 5 to 7 quarts depending on engine size. The 3.6L V6 engine takes 6 quarts, the 5.7L Hemi V8 takes 7 quarts, and the 6.4L and 6.2L V8 engines take 7 quarts with filter replacement. Smaller displacement engines like the 2.7L V6 require only 5 quarts.
What is the recommended oil type for a Dodge Challenger?
Full synthetic oil is recommended for all modern Dodge Challenger engines from 2008 to 2023. V6 and base V8 engines use oils meeting Chrysler MS-6395 specification, while high-performance V8 engines require oils meeting MS-12633 specification. Pennzoil, Mopar, Shell Helix, and Mobil 1 oils meet these specifications.
What is the oil change interval for a Dodge Challenger?
The oil change interval for Dodge Challenger varies by engine type and driving conditions. V6 and naturally aspirated V8 engines typically require oil changes every 10,000 miles or 12 months under normal conditions. Supercharged and high-performance engines should have oil changed every 6,000 miles or 12 months. Severe driving conditions require more frequent changes every 3,000 to 5,000 miles.
Can I use 5W-30 instead of 5W-20 in my Challenger?
Using 5W-30 instead of the specified 5W-20 is not recommended for Dodge Challenger engines. The specified viscosity ensures proper Multi-Displacement System operation and fuel efficiency. Using incorrect viscosity may affect engine performance, fuel economy, and potentially void warranty coverage. Always use the viscosity specified on the oil filler cap.
What oil filter does a Dodge Challenger use?
Dodge Challenger oil filter part numbers vary by engine configuration. The 3.6L V6 and 5.7L V8 engines use Mopar MO-339 or equivalents like Mobil 1 M1-110A and K&N HP-1008. The 6.4L 392 Hemi uses Mopar MO-090 or Mobil 1 M1-113A. The supercharged 6.2L Hellcat engines use Mopar MO-899. Replace the oil filter at every oil change interval.
Conclusion
The Dodge Challenger requires specific oil capacities, viscosities, and types depending on engine configuration across model years 2008 to 2023. V6 engines use 6 quarts of SAE 5W-20 full synthetic oil, while V8 engines require 7 quarts of either SAE 5W-20, 0W-40, or 5W-40 depending on the specific engine.
Using manufacturer-approved oil meeting Chrysler MS-6395 or MS-12633 specifications ensures proper engine protection and performance. High-performance and supercharged engines demand premium synthetic oils to withstand extreme operating conditions. Following recommended oil change intervals and using quality oil filters maintains engine reliability and maximizes longevity.
