The Jeep Commander is a mid-size SUV that was manufactured from 2006 to 2010. It was offered with three primary engine options: a 3.7L V6, a 4.7L V8, and a 5.7L Hemi V8. Using the correct engine oil capacity, viscosity, and type is essential for maintaining engine performance and longevity.
This guide provides detailed oil specifications for all Jeep Commander model years, including oil capacity with and without filter, recommended viscosity grades, oil types, and maintenance intervals. The information below helps owners perform proper oil changes and maintain their vehicles according to manufacturer specifications.
Selecting the appropriate oil specification prevents premature engine wear, maintains fuel efficiency, and ensures proper lubrication under various operating conditions.
Quick Navigation
2010 Jeep Commander Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 3.7L PowerTech V6 |
| Oil Capacity (with Filter) | 5.0 qt (4.7 L) |
| Oil Capacity (without Filter) | 4.5 qt (4.3 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar 5184231AA, Mobil 1 M1-110A, Fram XG7317 |
| Specification | Detail |
|---|---|
| Engine | 4.7L PowerTech V8 |
| Oil Capacity (with Filter) | 6.0 qt (5.7 L) |
| Oil Capacity (without Filter) | 5.5 qt (5.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-899, K&N HP-1004, Fram XG7317 |
| Specification | Detail |
|---|---|
| Engine | 5.7L Hemi V8 |
| Oil Capacity (with Filter) | 7.0 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.1 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-899, Mobil 1 M1-110, K&N HP-1008 |
The 2010 Jeep Commander uses three engine options that require between 5.0 and 7.0 quarts of SAE 5W-20 full synthetic oil, depending on the engine. The 5W-20 viscosity provides optimal protection and fuel efficiency under normal driving conditions.
2009 Jeep Commander Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 3.7L PowerTech V6 |
| Oil Capacity (with Filter) | 5.0 qt (4.7 L) |
| Oil Capacity (without Filter) | 4.5 qt (4.3 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar 5184231AA, Mobil 1 M1-110A, Fram XG7317 |
| Specification | Detail |
|---|---|
| Engine | 4.7L PowerTech V8 |
| Oil Capacity (with Filter) | 6.0 qt (5.7 L) |
| Oil Capacity (without Filter) | 5.5 qt (5.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-899, K&N HP-1004, Fram XG7317 |
| Specification | Detail |
|---|---|
| Engine | 5.7L Hemi V8 |
| Oil Capacity (with Filter) | 7.0 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.1 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-899, Mobil 1 M1-110, K&N HP-1008 |
The 2009 Jeep Commander requires SAE 5W-20 full synthetic oil across all three engine options. The 3.7L V6 takes 5.0 quarts, the 4.7L V8 requires 6.0 quarts, and the 5.7L Hemi V8 needs 7.0 quarts with filter.
2008 Jeep Commander Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 3.7L PowerTech V6 |
| Oil Capacity (with Filter) | 5.0 qt (4.7 L) |
| Oil Capacity (without Filter) | 4.5 qt (4.3 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar 5184231AA, Mobil 1 M1-110A, Fram XG7317 |
| Specification | Detail |
|---|---|
| Engine | 4.7L PowerTech V8 |
| Oil Capacity (with Filter) | 6.0 qt (5.7 L) |
| Oil Capacity (without Filter) | 5.5 qt (5.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-899, K&N HP-1004, Fram XG7317 |
| Specification | Detail |
|---|---|
| Engine | 5.7L Hemi V8 |
| Oil Capacity (with Filter) | 7.0 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.1 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-899, Mobil 1 M1-110, K&N HP-1008 |
The 2008 Jeep Commander uses SAE 5W-20 full synthetic oil for all engine configurations. The oil capacity ranges from 5.0 quarts for the V6 to 7.0 quarts for the Hemi V8.
2007 Jeep Commander Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 3.7L PowerTech V6 |
| Oil Capacity (with Filter) | 5.0 qt (4.7 L) |
| Oil Capacity (without Filter) | 4.5 qt (4.3 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar 5184231AA, Mobil 1 M1-110A, Fram XG7317 |
| Specification | Detail |
|---|---|
| Engine | 4.7L PowerTech V8 |
| Oil Capacity (with Filter) | 6.0 qt (5.7 L) |
| Oil Capacity (without Filter) | 5.5 qt (5.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-899, K&N HP-1004, Fram XG7317 |
| Specification | Detail |
|---|---|
| Engine | 5.7L Hemi V8 |
| Oil Capacity (with Filter) | 7.0 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.1 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-899, Mobil 1 M1-110, K&N HP-1008 |
The 2007 Jeep Commander requires SAE 5W-20 full synthetic oil across all three available engines. Using the correct oil capacity ensures proper lubrication and engine protection.
2006 Jeep Commander Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 3.7L PowerTech V6 |
| Oil Capacity (with Filter) | 5.0 qt (4.7 L) |
| Oil Capacity (without Filter) | 4.5 qt (4.3 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar 5184231AA, Mobil 1 M1-110A, Fram XG7317 |
| Specification | Detail |
|---|---|
| Engine | 4.7L PowerTech V8 |
| Oil Capacity (with Filter) | 6.0 qt (5.7 L) |
| Oil Capacity (without Filter) | 5.5 qt (5.2 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-30 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-899, K&N HP-1004, Fram XG7317 |
| Specification | Detail |
|---|---|
| Engine | 5.7L Hemi V8 |
| Oil Capacity (with Filter) | 7.0 qt (6.6 L) |
| Oil Capacity (without Filter) | 6.5 qt (6.1 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Every 7,500 miles or 12 months |
| Oil Drain Plug Torque | 20 lb-ft (27 N·m) |
| Recommended Filters | Mopar MO-899, Mobil 1 M1-110, K&N HP-1008 |
The 2006 Jeep Commander was the first model year and originally specified SAE 5W-30 for the 3.7L V6 and 4.7L V8 engines. The 5.7L Hemi V8 used SAE 5W-20 from its introduction.
Oil Maintenance and Service Tips
Regular Oil Changes
Jeep recommends changing the engine oil every 7,500 miles or 12 months, whichever comes first, when using full synthetic oil. This interval applies to normal driving conditions and should be shortened for severe service conditions.
Severe Driving Conditions
Reduce oil change intervals to every 5,000 miles if you frequently drive in extreme temperatures, tow heavy loads, or operate in dusty environments. Short trips and stop-and-go traffic also qualify as severe service and require more frequent maintenance.
Oil Level Checks
Check the engine oil level at least once per month and before long trips. Park the vehicle on level ground, wait 5 minutes after turning off the engine, and use the dipstick to verify the oil level falls between the minimum and maximum marks.
Oil Filter Replacement
Always replace the oil filter during each oil change to maintain proper filtration and engine protection. Use Mopar original equipment filters or quality equivalents that meet manufacturer specifications.
| Driving Condition | Oil Change Interval |
|---|---|
| Normal Conditions | Every 7,500 miles or 12 months |
| Severe Conditions | Every 5,000 miles or 6 months |
| Extreme Use (Towing/Off-Road) | Every 3,000-5,000 miles |
FAQs
What kind of oil does a Jeep Commander use?
The Jeep Commander uses SAE 5W-20 full synthetic oil for model years 2007-2010 across all engines. The 2006 model year 3.7L V6 and 4.7L V8 engines originally specified SAE 5W-30, though 5W-20 became the standard viscosity for 2007 and later.
How much oil does a Jeep Commander take?
Oil capacity varies by engine size in the Jeep Commander. The 3.7L V6 requires 5.0 quarts, the 4.7L V8 needs 6.0 quarts, and the 5.7L Hemi V8 takes 7.0 quarts with filter replacement.
What is the recommended oil type for a Jeep Commander?
Mopar recommends using full synthetic oil that meets API certification standards in all Jeep Commander engines. Full synthetic oil provides superior protection, especially under extreme temperatures and high-stress driving conditions.
What is the oil change interval for a Jeep Commander?
The standard oil change interval for the Jeep Commander is every 7,500 miles or 12 months when using full synthetic oil. Drivers operating under severe conditions should reduce this interval to every 5,000 miles or 6 months.
Can I use synthetic blend oil in my Jeep Commander?
While full synthetic oil is recommended for optimal engine protection and performance, synthetic blend oil can be used if necessary. However, switching between oil types should be avoided, and full synthetic provides better protection for modern engines.
What oil filter does a Jeep Commander use?
The Jeep Commander uses different oil filters depending on the engine. The 3.7L V6 uses Mopar part number 5184231AA (MO-231), while the 4.7L V8 and 5.7L Hemi V8 typically use Mopar MO-899 or equivalent aftermarket filters like Mobil 1 M1-110A and K&N HP-1004.
Conclusion
The Jeep Commander requires 5.0 to 7.0 quarts of SAE 5W-20 full synthetic oil depending on the engine configuration. The 3.7L V6 uses 5.0 quarts, the 4.7L V8 requires 6.0 quarts, and the 5.7L Hemi V8 needs 7.0 quarts with filter.
Using manufacturer-approved oil specifications ensures optimal engine performance, fuel efficiency, and longevity. Always change the oil and filter at the recommended intervals and check oil levels regularly between services.
Following proper maintenance schedules and using quality synthetic oil protects your Jeep Commander engine from premature wear and extends its service life. Consult your owner’s manual for specific requirements and adjust service intervals based on your driving conditions.
