The Lincoln MKX is a mid-size crossover SUV produced from the 2007 to 2018 model years over two generations. Using the correct engine oil capacity, viscosity, and type is essential for maintaining performance and engine longevity. This guide lists all Lincoln MKX model years with engine oil specifications and basic maintenance recommendations.
Quick Navigation
2018 Lincoln MKX Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 3.7L V6 Duratec (Ti-VCT) |
| Oil Capacity (with Filter) | 6.0 qt (5.7 L) |
| Oil Capacity (without Filter) | ~5.5 qt (5.2 L) (approximate service fill) |
| Recommended Oil Type | Full synthetic meeting Ford WSS-M2C945-A / WSS-M2C946-A or later |
| Viscosity | SAE 5W-20 (commonly used) or 5W-30 where specified |
| Oil Change Interval | Typically around every 7,500 miles or 12 months under normal conditions (follow owner’s manual) |
| Oil Drain Plug Torque | Approximately 20–30 lb-ft (27–40 N·m) typical for this platform (verify per service data) |
| Recommended Filters | Motorcraft FL-500S and equivalents such as Mobil 1 M1-113A, Fram XG10575 |
The 2018 Lincoln MKX 3.7L V6 typically requires about 6.0 qt (5.7 L) of full synthetic engine oil with the filter changed. Using SAE 5W-20 or 5W-30 oil that meets the Ford specification provides stable viscosity and protection for this engine under normal driving conditions.
2017 Lincoln MKX Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 3.7L V6 Duratec (Ti-VCT) |
| Oil Capacity (with Filter) | 6.0 qt (5.7 L) |
| Oil Capacity (without Filter) | ~5.5 qt (5.2 L) (approximate service fill) |
| Recommended Oil Type | Full synthetic meeting Ford WSS-M2C945-A / WSS-M2C946-A or equivalent |
| Viscosity | SAE 5W-20 for most climates; 5W-30 where specified |
| Oil Change Interval | About every 7,500 miles or 12 months under normal service (check vehicle schedule) |
| Oil Drain Plug Torque | Approximately 20–30 lb-ft (27–40 N·m) typical |
| Recommended Filters | Motorcraft FL-500S or equivalent premium synthetic-compatible filter |
The 2017 Lincoln MKX engine oil capacity is about 6.0 qt (5.7 L) with the filter for the 3.7L V6 configuration. A quality full synthetic 5W-20 oil that meets the Ford specification helps maintain proper lubrication and efficiency across typical operating temperatures.
2016 Lincoln MKX Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 3.7L V6 Duratec and 2.7L EcoBoost V6 options |
| Oil Capacity (with Filter) | 6.0 qt (5.7 L) for both engines |
| Oil Capacity (without Filter) | ~5.5 qt (5.2 L) (approximate) |
| Recommended Oil Type | Full synthetic oil meeting Ford WSS-M2C945-A / WSS-M2C946-A or equivalent |
| Viscosity | 5W-20 for 3.7L; 5W-30 commonly used for 2.7L EcoBoost |
| Oil Change Interval | Around every 7,500 miles or 12 months under normal use (confirm via maintenance schedule) |
| Oil Drain Plug Torque | Approximately 20–30 lb-ft (27–40 N·m) |
| Recommended Filters | Motorcraft FL-500S and equivalents such as Mahle or premium synthetic filters for EcoBoost |
The 2016 Lincoln MKX engines generally take about 6.0 qt (5.7 L) of full synthetic oil with the filter during an oil change. Using 5W-20 in the 3.7L V6 and 5W-30 in the 2.7L EcoBoost provides suitable viscosity for wear protection and fuel economy.
2015 Lincoln MKX Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 3.7L V6 Duratec |
| Oil Capacity (with Filter) | 6.0 qt (5.7 L) |
| Oil Capacity (without Filter) | ~5.5 qt (5.2 L) (approximate) |
| Recommended Oil Type | Full synthetic or synthetic blend meeting Ford WSS-M2C945-A |
| Viscosity | SAE 5W-20 commonly specified |
| Oil Change Interval | Typically 7,500 miles or 12 months under normal conditions, shorter for severe service |
| Oil Drain Plug Torque | Approximately 20–30 lb-ft (27–40 N·m) |
| Recommended Filters | Motorcraft FL-500S, plus quality equivalents from major filter brands |
The 2015 Lincoln MKX with the 3.7L V6 uses about 6.0 qt (5.7 L) of oil when the filter is replaced. A 5W-20 synthetic or synthetic blend oil that meets the Ford service specification supports consistent oil flow and film strength across a wide temperature range.
2014 Lincoln MKX Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 3.7L V6 Duratec |
| Oil Capacity (with Filter) | 6.0 qt (5.7 L) |
| Oil Capacity (without Filter) | ~5.5 qt (5.2 L) (approximate) |
| Recommended Oil Type | Synthetic blend or full synthetic meeting Ford specification for gasoline engines |
| Viscosity | SAE 5W-20 recommended |
| Oil Change Interval | Approximately 7,500 miles or 12 months for normal driving, adjust for severe conditions |
| Oil Drain Plug Torque | Approximately 20–30 lb-ft (27–40 N·m) |
| Recommended Filters | Motorcraft FL-500S and compatible aftermarket filters |
The 2014 Lincoln MKX engine oil capacity is about 6.0 qt (5.7 L) with a new filter installed. Using the specified 5W-20 oil keeps viscosity within the range intended by the manufacturer for efficient lubrication and start-up protection.
2013 Lincoln MKX Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 3.7L V6 Duratec |
| Oil Capacity (with Filter) | 6.0 qt (5.7 L) |
| Oil Capacity (without Filter) | ~5.5 qt (5.2 L) |
| Recommended Oil Type | Full synthetic or synthetic blend that meets Ford gasoline engine specs |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Around every 7,500 miles or 12 months in normal service |
| Oil Drain Plug Torque | Approximately 20–30 lb-ft (27–40 N·m) |
| Recommended Filters | Motorcraft FL-500S; aftermarket equivalents from major brands |
The 2013 Lincoln MKX 3.7L requires approximately 6.0 qt (5.7 L) of oil when the filter is changed. A 5W-20 synthetic or synthetic blend oil provides the specified viscosity profile for reliable engine protection and proper oil pressure.
2012 Lincoln MKX Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 3.7L V6 Duratec |
| Oil Capacity (with Filter) | 6.0 qt (5.7 L) |
| Oil Capacity (without Filter) | ~5.5 qt (5.2 L) |
| Recommended Oil Type | Synthetic blend or full synthetic meeting Ford WSS-M2C945-A |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Typically 7,500 miles or 12 months for normal driving conditions |
| Oil Drain Plug Torque | Approximately 20–30 lb-ft (27–40 N·m) |
| Recommended Filters | Motorcraft FL-500S and compatible aftermarket filters |
The 2012 Lincoln MKX 3.7L V6 usually takes 6.0 qt (5.7 L) of engine oil with the filter replaced. Keeping to a 5W-20 viscosity in a synthetic blend or full synthetic formulation supports the designed oil flow and wear protection.
2011 Lincoln MKX Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 3.7L V6 Duratec (facelift first generation) |
| Oil Capacity (with Filter) | 6.0 qt (5.7 L) |
| Oil Capacity (without Filter) | ~5.5 qt (5.2 L) |
| Recommended Oil Type | Synthetic blend or full synthetic meeting Ford gasoline engine specifications |
| Viscosity | SAE 5W-20 |
| Oil Change Interval | Around 7,500 miles or 12 months under normal use |
| Oil Drain Plug Torque | Approximately 20–30 lb-ft (27–40 N·m) |
| Recommended Filters | Motorcraft FL-500S; quality equivalents from major oil filter brands |
The 2011 Lincoln MKX 3.7L V6 has an engine oil capacity of about 5.7 L, or roughly 6.0 qt, with the filter changed. Following the recommended 5W-20 viscosity and a synthetic-compatible filter helps maintain correct oil pressure and durability.
2010 Lincoln MKX Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 3.5L V6 Duratec |
| Oil Capacity (with Filter) | About 6.0 qt (5.7 L) commonly supplied in service kits |
| Oil Capacity (without Filter) | ~5.5 qt (5.2 L) (approximate) |
| Recommended Oil Type | Synthetic blend or full synthetic matching Ford gasoline oil spec |
| Viscosity | Often specified as SAE 5W-20; some catalogs list 0W-20 or 5W-30 options |
| Oil Change Interval | Commonly 5,000–7,500 miles depending on driving conditions and maintenance schedule |
| Oil Drain Plug Torque | Approximately 20–30 lb-ft (27–40 N·m) |
| Recommended Filters | Motorcraft FL-400S / FL-500S depending on catalog, plus compatible filters |
The 2010 Lincoln MKX 3.5L V6 typically takes about 6.0 qt (5.7 L) of engine oil when the filter is replaced. Using a 5W-20 synthetic blend or full synthetic oil that meets the Ford specification provides appropriate viscosity and lubrication stability.
2009 Lincoln MKX Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 3.5L V6 Duratec |
| Oil Capacity (with Filter) | About 6.0 qt (5.7 L) typical service fill |
| Oil Capacity (without Filter) | ~5.5 qt (5.2 L) |
| Recommended Oil Type | Synthetic blend or full synthetic that meets Ford gasoline engine oil spec |
| Viscosity | Commonly 5W-20; alternative viscosities such as 0W-20 or 5W-30 may be listed for some climates |
| Oil Change Interval | Roughly 5,000–7,500 miles depending on usage and schedule |
| Oil Drain Plug Torque | Approximately 20–30 lb-ft (27–40 N·m) |
| Recommended Filters | Motorcraft FL-400S / FL-500S and compatible aftermarket filters |
The 2009 Lincoln MKX uses roughly 6.0 qt (5.7 L) of engine oil with a filter replacement for the 3.5L V6. A 5W-20 synthetic blend or full synthetic oil gives a suitable viscosity profile for daily driving and cold starts.
2008 Lincoln MKX Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 3.5L V6 Duratec |
| Oil Capacity (with Filter) | About 6.0 qt (5.7 L) |
| Oil Capacity (without Filter) | ~5.5 qt (5.2 L) |
| Recommended Oil Type | Synthetic blend or full synthetic meeting Ford spec for gasoline engines |
| Viscosity | SAE 5W-20 typically recommended; other viscosities may be allowed by climate chart |
| Oil Change Interval | About 5,000–7,500 miles based on normal vs. severe service |
| Oil Drain Plug Torque | Approximately 20–30 lb-ft (27–40 N·m) |
| Recommended Filters | Motorcraft FL-400S / FL-500S equivalents |
The 2008 Lincoln MKX 3.5L V6 generally needs about 6.0 qt (5.7 L) of oil when the filter is changed. Sticking to a 5W-20 synthetic blend or full synthetic oil helps maintain the designed oil pressure and engine wear characteristics.
2007 Lincoln MKX Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 3.5L V6 Duratec, first model year |
| Oil Capacity (with Filter) | About 6.0 qt (5.7 L) commonly used in service kits |
| Oil Capacity (without Filter) | ~5.5 qt (5.2 L) |
| Recommended Oil Type | Synthetic blend or full synthetic meeting Ford gasoline engine oil standards |
| Viscosity | Generally 5W-20; some references note optional 0W-20 or 5W-30 depending on conditions |
| Oil Change Interval | Typically 5,000–7,500 miles based on maintenance schedule and driving style |
| Oil Drain Plug Torque | Approximately 20–30 lb-ft (27–40 N·m) |
| Recommended Filters | Motorcraft FL-400S / FL-500S and similar high-quality filters |
The 2007 Lincoln MKX 3.5L V6 usually takes around 6.0 qt (5.7 L) of engine oil with filter replacement. A 5W-20 synthetic blend or full synthetic oil provides a balanced viscosity for engine protection and fuel efficiency.
Oil Maintenance & Service Tips
Regularly checking engine oil level on the dipstick before long trips helps catch low oil levels early and prevents damage. Always perform oil filter replacement at the same time as the oil change so that synthetic oil stays clean and the lubrication system maintains proper flow.
Follow the maintenance interval listed in the owner’s manual, adjusting for severe service such as frequent short trips, towing, or extreme temperatures. Using the specified oil type and viscosity and tightening the drain plug and filter to the correct torque helps prevent leaks and ensures stable oil pressure.
Normal vs. Severe Driving Conditions (General Guideline)
| Condition | Typical Interval | Notes |
|---|---|---|
| Normal service | Around 7,500 miles or 12 months | Mixed highway and city driving with moderate loads |
| Severe service | Often 5,000 miles or less | Frequent short trips, towing, extreme heat or cold, dusty roads |
When exploring Lincoln, don’t miss our detailed guides on popular models like the Lincoln Navigator L, Lincoln Town, Lincoln Navigator, and Lincoln Continental. Understanding engine oil capacity is crucial for proper maintenance, and our expert resources explain the exact oil requirements for these models. You’ll also find insights on recommended oil types, service intervals, and common issues linked to incorrect oil levels, ensuring your Lincoln always delivers reliable performance.
FAQs
What kind of oil does a Lincoln MKX use?
Most Lincoln MKX engines use synthetic blend or full synthetic engine oil that meets the relevant Ford WSS-M2C9xx specification for gasoline engines. Later 3.7L and 2.7L engines typically specify 5W-20 or 5W-30 viscosity, so always verify the exact oil type in the owner’s manual or under-hood label.
How much oil does a Lincoln MKX take?
Many Lincoln MKX model years with the 3.5L or 3.7L V6 require about 6.0 qt (5.7 L) of oil when the filter is changed. Some engines, including the 2.7L EcoBoost, also fall close to this capacity, but it is best to confirm by model year and engine code.
What is the recommended oil type for a Lincoln MKX?
The recommended oil type for a Lincoln MKX is typically a synthetic blend or full synthetic oil that meets Ford’s WSS-M2C945-A, WSS-M2C946-A, or superseding specifications. Using oil that meets these standards ensures the correct detergency, viscosity stability, and compatibility with the vehicle’s emissions and lubrication systems.
What is the oil change interval for a Lincoln MKX?
For many Lincoln MKX models, the oil change interval is around 7,500 miles or 12 months under normal driving conditions. Vehicles driven in severe conditions, such as frequent short trips, towing, or dusty environments, may require shorter intervals as outlined in the maintenance schedule.
Can I use full synthetic oil in a Lincoln MKX?
Full synthetic oil is suitable for Lincoln MKX engines as long as it meets the required Ford specification and viscosity rating. Many owners and service providers choose synthetic oil for better high-temperature stability and longer protection within the recommended maintenance interval.
Which oil filter should I use on a Lincoln MKX?
Lincoln typically specifies Motorcraft filters such as FL-500S or FL-400S depending on model year and engine, and these are designed to match the engine’s oil system characteristics. Equivalent premium filters from reputable brands can also be used if they meet or exceed the original equipment performance specification.
Conclusion
Across its production run, the Lincoln MKX generally uses about 6.0 qt (5.7 L) of engine oil, with 5W-20 or 5W-30 synthetic or synthetic blend oil specified for most engines. Using the correct oil capacity, type, and viscosity that meet Ford specifications and combining it with timely oil and filter changes helps protect the engine and maintain reliable performance over the service life of the vehicle.
