The Mercedes-Benz E 400 was produced from 2015 to 2019 as part of the W213 generation. The E 400 is equipped with a 3.0L twin-turbo V6 engine (M276) that requires specific oil specifications for optimal performance. Using the correct oil capacity, viscosity, and type is essential for maintaining engine performance and longevity. This guide lists all model years with full oil specifications and maintenance recommendations.
Quick Navigation
2019 Mercedes-Benz E 400 Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 3.0L Twin-Turbo V6 (M276) |
| Oil Capacity (with Filter) | 7.4 qt (7.0 L) |
| Oil Capacity (without Filter) | 6.9 qt (6.5 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 0W-40 or 5W-40 |
| Oil Change Interval | Every 10,000 miles or 12 months |
| Oil Drain Plug Torque | 22 lb-ft (30 N·m) |
| Recommended Filters | OEM A 276 180 00 09, MAHLE OX 823/6D, BOSCH F 026 407 238 |
The 2019 Mercedes-Benz E 400 uses a 3.0L twin-turbo V6 engine that requires 7.4 quarts of full synthetic oil. Using 0W-40 or 5W-40 oil with MB-Approval 229.5 provides the right balance of protection and efficiency under normal driving conditions.
2018 Mercedes-Benz E 400 Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 3.0L Twin-Turbo V6 (M276) |
| Oil Capacity (with Filter) | 7.4 qt (7.0 L) |
| Oil Capacity (without Filter) | 6.9 qt (6.5 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 0W-40 or 5W-40 |
| Oil Change Interval | Every 10,000 miles or 12 months |
| Oil Drain Plug Torque | 22 lb-ft (30 N·m) |
| Recommended Filters | OEM A 276 180 00 09, MAHLE OX 823/6D, BOSCH F 026 407 238 |
The 2018 Mercedes-Benz E 400 with the M276 twin-turbo V6 requires 7.4 quarts of synthetic oil with filter. The manufacturer recommends using MB-Approval 229.5 certified oil for optimal engine protection and performance.
2017 Mercedes-Benz E 400 Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 3.0L Twin-Turbo V6 (M276) |
| Oil Capacity (with Filter) | 7.4 qt (7.0 L) |
| Oil Capacity (without Filter) | 6.9 qt (6.5 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 0W-40 or 5W-40 |
| Oil Change Interval | Every 10,000 miles or 12 months |
| Oil Drain Plug Torque | 22 lb-ft (30 N·m) |
| Recommended Filters | OEM A 276 180 00 09, MAHLE OX 823/6D, BOSCH F 026 407 238 |
The 2017 Mercedes-Benz E 400 4MATIC features a 3.0L V6 engine producing 329 horsepower. This engine requires 7.4 quarts of full synthetic oil with viscosity grade 0W-40 or 5W-40.
2016 Mercedes-Benz E 400 Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 3.0L Twin-Turbo V6 (M276) |
| Oil Capacity (with Filter) | 7.4 qt (7.0 L) |
| Oil Capacity (without Filter) | 6.9 qt (6.5 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 0W-40 or 5W-40 |
| Oil Change Interval | Every 10,000 miles or 12 months |
| Oil Drain Plug Torque | 22 lb-ft (30 N·m) |
| Recommended Filters | OEM A 276 180 00 09, MAHLE OX 823/6D, BOSCH F 026 407 238 |
The 2016 Mercedes-Benz E 400 uses the M276 twin-turbo V6 engine with a 7.4 quart oil capacity. Full synthetic oil meeting MB-Approval 229.5 specification is required for proper engine lubrication and protection.
2015 Mercedes-Benz E 400 Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 3.0L Twin-Turbo V6 (M276) |
| Oil Capacity (with Filter) | 7.4 qt (7.0 L) |
| Oil Capacity (without Filter) | 6.9 qt (6.5 L) |
| Recommended Oil Type | Full Synthetic |
| Viscosity | SAE 0W-40 or 5W-40 |
| Oil Change Interval | Every 10,000 miles or 12 months |
| Oil Drain Plug Torque | 22 lb-ft (30 N·m) |
| Recommended Filters | OEM A 276 180 00 09, MAHLE OX 823/6D, BOSCH F 026 407 238 |
The 2015 Mercedes-Benz E 400 requires 7.4 quarts of full synthetic oil with filter replacement. Using 0W-40 or 5W-40 viscosity oil provides the right balance of protection and efficiency under normal driving conditions.
Oil Maintenance and Service Tips
Regular oil changes are critical for maintaining engine performance and longevity in your Mercedes-Benz E 400. The manufacturer recommends synthetic oil changes every 10,000 miles or 12 months under normal driving conditions. For severe driving conditions including frequent short trips, dusty environments, or extreme temperatures, consider reducing the oil change interval to 7,500 miles.
Oil Check Procedure
Check engine oil level when the engine is warm and the vehicle is on level ground. Allow 5 minutes after shutting off the engine for oil to drain back into the pan. Use only oil that meets Mercedes-Benz MB-Approval 229.5 specification to ensure proper engine protection.
Oil Filter Replacement
Always replace the oil filter during every oil change. The oil filter should be torqued to 18 lb-ft (25 N·m) during installation. Replace the drain plug washer each time and torque the drain plug to 22 lb-ft (30 N·m).
Normal vs. Severe Driving Conditions
| Driving Condition | Oil Change Interval |
|---|---|
| Normal Driving | Every 10,000 miles or 12 months |
| Severe Driving | Every 7,500 miles or 6 months |
Severe driving includes frequent short trips under 10 miles, extensive idling, towing, dusty conditions, or extreme temperatures.
Frequently Asked Questions
What kind of oil does a Mercedes-Benz E 400 use?
The Mercedes-Benz E 400 requires full synthetic motor oil meeting MB-Approval 229.5 specification. The recommended viscosity grades are 0W-40 or 5W-40 depending on climate conditions.
How much oil does a Mercedes-Benz E 400 take?
The Mercedes-Benz E 400 takes 7.4 quarts (7.0 liters) of engine oil with filter replacement. Without filter replacement, the capacity is approximately 6.9 quarts (6.5 liters).
What is the oil change interval for a Mercedes-Benz E 400?
The recommended oil change interval for a Mercedes-Benz E 400 is every 10,000 miles or 12 months under normal driving conditions. For severe driving conditions, reduce the interval to 7,500 miles or 6 months.
What oil filter does a Mercedes-Benz E 400 use?
The Mercedes-Benz E 400 uses OEM part number A 276 180 00 09 for the oil filter. Equivalent aftermarket filters include MAHLE OX 823/6D and BOSCH F 026 407 238.
Can I use 5W-30 oil in my Mercedes-Benz E 400?
While 5W-30 oil may be compatible with some Mercedes engines, the E 400 with the M276 V6 engine specifically requires 0W-40 or 5W-40 viscosity oil meeting MB-Approval 229.5. Always follow manufacturer specifications for optimal engine protection.
What is the oil drain plug torque for Mercedes-Benz E 400?
The oil drain plug on the Mercedes-Benz E 400 should be torqued to 22 lb-ft (30 N·m). Always replace the drain plug washer during each oil change to prevent leaks.
Conclusion
The Mercedes-Benz E 400 requires 7.4 quarts of full synthetic oil with 0W-40 or 5W-40 viscosity. Using oil that meets MB-Approval 229.5 specification ensures optimal engine protection and performance. Following the recommended 10,000-mile oil change interval and proper maintenance procedures will help maintain engine reliability and longevity throughout the vehicle’s lifespan.
