Mitsubishi Eclipse Engine Oil Capacity: All Years & Engines

The Mitsubishi Eclipse was produced from 1990 to 2012 as a sport compact coupe across four generations. Using the correct oil capacity, viscosity, and type is essential for maintaining engine performance and longevity. This guide lists all model years with full oil specifications and maintenance recommendations.

2012 Mitsubishi Eclipse Engine Oil Capacity

The 2012 Mitsubishi Eclipse uses either a 2.4L four-cylinder or 3.8L V6 engine that requires 4.2 quarts of full synthetic oil. Using SAE 5W-20 oil provides the right balance of protection and efficiency under normal driving conditions.

2011 Mitsubishi Eclipse Engine Oil Capacity

The 2011 Mitsubishi Eclipse uses a 2.4L four-cylinder or 3.8L V6 engine that requires 4.2 quarts of full synthetic oil. SAE 5W-20 viscosity is recommended for optimal engine protection and fuel economy.

2010 Mitsubishi Eclipse Engine Oil Capacity

The 2010 Mitsubishi Eclipse requires 4.2 quarts of SAE 5W-20 full synthetic oil for both engine options. Regular oil changes maintain proper lubrication and prevent premature engine wear.

2009 Mitsubishi Eclipse Engine Oil Capacity

The 2009 Mitsubishi Eclipse uses 4.2 quarts of SAE 5W-20 full synthetic oil. This viscosity grade ensures proper flow characteristics in cold weather while maintaining protection at operating temperature.

2008 Mitsubishi Eclipse Engine Oil Capacity

The 2008 Mitsubishi Eclipse requires 4.2 quarts of SAE 5W-20 full synthetic oil. Using the manufacturer-specified viscosity maintains optimal engine efficiency and meets warranty requirements.

2007 Mitsubishi Eclipse Engine Oil Capacity

The 2007 Mitsubishi Eclipse uses 4.2 quarts of SAE 5W-20 full synthetic oil for optimal performance. Synthetic oil provides superior protection against thermal breakdown compared to conventional oils.

2006 Mitsubishi Eclipse Engine Oil Capacity

The 2006 Mitsubishi Eclipse requires 4.2 quarts of SAE 5W-20 full synthetic oil. This model year introduced the fourth-generation platform with updated engine specifications.

2005 Mitsubishi Eclipse Engine Oil Capacity

The 2005 Mitsubishi Eclipse uses a 2.4L four-cylinder or 3.0L V6 engine that requires 4.0 quarts of oil. SAE 5W-30 or 10W-30 viscosity is recommended for this model year.

2004 Mitsubishi Eclipse Engine Oil Capacity

The 2004 Mitsubishi Eclipse requires 4.0 quarts of SAE 5W-30 or 10W-30 oil. Using API SM or higher rated oil ensures adequate engine protection.

2003 Mitsubishi Eclipse Engine Oil Capacity

The 2003 Mitsubishi Eclipse uses 4.0 quarts of SAE 5W-30 or 10W-30 oil. Regular oil changes prevent sludge buildup and maintain proper oil pressure.

2002 Mitsubishi Eclipse Engine Oil Capacity

The 2002 Mitsubishi Eclipse requires 4.0 quarts of SAE 5W-30 or 10W-30 oil. Both engine options share the same oil capacity specifications.

2001 Mitsubishi Eclipse Engine Oil Capacity

The 2001 Mitsubishi Eclipse uses 4.0 quarts of SAE 5W-30 or 10W-30 oil. This model year maintained the same specifications as the 2000 redesign.

2000 Mitsubishi Eclipse Engine Oil Capacity

The 2000 Mitsubishi Eclipse requires 4.0 quarts of SAE 5W-30 or 10W-30 oil. This year marked the introduction of the third-generation platform with completely redesigned body and chassis.

1999 Mitsubishi Eclipse Engine Oil Capacity

The 1999 Mitsubishi Eclipse uses 3.75 quarts of SAE 5W-30 or 10W-30 oil. This was the final year for the second-generation platform.

1998 Mitsubishi Eclipse Engine Oil Capacity

The 1998 Mitsubishi Eclipse requires 3.75 quarts of SAE 5W-30 or 10W-30 oil. All engine variants for this year share the same oil capacity.

1997 Mitsubishi Eclipse Engine Oil Capacity

The 1997 Mitsubishi Eclipse uses 3.75 quarts of SAE 5W-30 or 10W-30 oil. This model year continued the second-generation design introduced in 1995.

1996 Mitsubishi Eclipse Engine Oil Capacity

The 1996 Mitsubishi Eclipse requires 3.75 quarts of SAE 5W-30 or 10W-30 oil. A convertible body style was added during this model year.

1995 Mitsubishi Eclipse Engine Oil Capacity

The 1995 Mitsubishi Eclipse uses 3.75 quarts of SAE 5W-30 or 10W-30 oil. This year introduced the second-generation platform with updated styling and engineering.

1994 Mitsubishi Eclipse Engine Oil Capacity

The 1994 Mitsubishi Eclipse requires 4.0 quarts of SAE 5W-30 or 10W-30 oil. This was the final year of the first-generation model.

1993 Mitsubishi Eclipse Engine Oil Capacity

The 1993 Mitsubishi Eclipse uses 4.0 quarts of SAE 5W-30 or 10W-30 oil. The turbocharged 4G63T engine maintained the same oil capacity as naturally aspirated variants.

1992 Mitsubishi Eclipse Engine Oil Capacity

The 1992 Mitsubishi Eclipse requires 4.0 quarts of SAE 5W-30 or 10W-30 oil. This model year was available in both front-wheel-drive and all-wheel-drive configurations.

1991 Mitsubishi Eclipse Engine Oil Capacity

The 1991 Mitsubishi Eclipse uses 4.0 quarts of SAE 5W-30 or 10W-30 oil. The turbocharged version produced up to 195 horsepower.

1990 Mitsubishi Eclipse Engine Oil Capacity

The 1990 Mitsubishi Eclipse requires 4.0 quarts of SAE 5W-30 or 10W-30 oil. This was the inaugural model year for the Eclipse sport compact coupe.

Oil Maintenance and Service Tips

Checking Oil Level

Check engine oil level when the vehicle is on level ground and the engine is cold. Remove the dipstick, wipe it clean, reinsert fully, and remove again to read the level. The oil should register between the minimum and maximum marks on the dipstick.

Oil Change Best Practices

Replace the oil filter with every oil change to remove contaminants and maintain proper filtration. Tighten the drain plug to the specified torque value to prevent leaks or damage to the oil pan threads. Allow the engine to drain for at least five minutes after removing the drain plug to ensure complete evacuation.

Normal vs. Severe Driving Conditions

Severe driving includes frequent short trips, extensive idling, dusty conditions, or towing. Using full synthetic oil extends drain intervals and provides superior protection under demanding conditions.

When exploring Mitsubishi, don’t miss our detailed guides on popular models like the Mitsubishi Montero, Mitsubishi Endeavor, Mitsubishi Lancer Evolution, and Mitsubishi Raider. Understanding engine oil capacity is crucial for proper maintenance, and our expert resources explain the exact oil requirements for these models. You’ll also find insights on recommended oil types, service intervals, and common issues linked to incorrect oil levels, ensuring your Mitsubishi always delivers reliable performance.

Frequently Asked Questions

What kind of oil does a Mitsubishi Eclipse use?

The Mitsubishi Eclipse uses SAE 5W-20 full synthetic oil for 2006-2012 models, while 2000-2005 models use SAE 5W-30 or 10W-30 synthetic blend or conventional oil. Earlier 1990-1999 models also use SAE 5W-30 or 10W-30 viscosity grades. Always use oil that meets API SL or higher specifications for proper engine protection.

How much oil does a Mitsubishi Eclipse take?

The Mitsubishi Eclipse oil capacity varies by generation: 2006-2012 models require 4.2 quarts with filter, 2000-2005 models need 4.0 quarts with filter, and 1995-1999 models use 3.75 quarts with filter. Early 1990-1994 models require approximately 4.0 quarts with filter. Always verify the exact capacity in your owner’s manual as specifications can vary by engine type.

What is the recommended oil type for a Mitsubishi Eclipse?

Full synthetic oil is recommended for 2006-2012 Mitsubishi Eclipse models for maximum protection and extended drain intervals. Synthetic blend or conventional oil is acceptable for 2000-2005 and earlier models. Full synthetic oil provides better thermal stability, reduces engine deposits, and improves cold weather starting compared to conventional oils.

What is the oil change interval for a Mitsubishi Eclipse?

The oil change interval for a Mitsubishi Eclipse is every 7,500 miles or 12 months under normal driving conditions for 2006-2012 models. Models from 2000-2005 should have oil changed every 5,000 miles or 6 months, while 1990-1999 models require changes every 3,000 miles or 3 months. Severe driving conditions cut these intervals in half.

Can I use 5W-30 instead of 5W-20 in my Mitsubishi Eclipse?

Using 5W-30 instead of the specified 5W-20 in 2006-2012 Eclipse models is not recommended as it may affect fuel economy and engine performance. The manufacturer specifies 5W-20 to meet emission standards and optimize fuel efficiency. Older models from 2005 and earlier that originally specified 5W-30 or 10W-30 should continue using these viscosity grades.

What oil filter fits a Mitsubishi Eclipse?

The oil filter for 2006-2012 Mitsubishi Eclipse models is OEM part number MZ690115, with compatible aftermarket options including Mobil 1 M1-110A and K&N HP-1008. Models from 2000-2005 use OEM MD360935 or equivalents like Mobil 1 M1-104 and FRAM PH3614. Earlier models use OEM MD050317 with aftermarket alternatives available from major filter manufacturers.

Conclusion

The Mitsubishi Eclipse requires specific oil capacity, viscosity, and type specifications that vary by model year and generation. Fourth-generation models (2006-2012) use 4.2 quarts of SAE 5W-20 full synthetic oil, while third-generation models (2000-2005) require 4.0 quarts of SAE 5W-30 or 10W-30 oil. Second-generation models (1995-1999) need 3.75 quarts, and first-generation models (1990-1994) use 4.0 quarts of SAE 5W-30 or 10W-30 oil.

Using manufacturer-approved oil specifications maintains optimal engine protection, fuel efficiency, and longevity. Always replace the oil filter during each oil change and torque the drain plug to 29 lb-ft to prevent leaks. Following recommended maintenance intervals ensures reliable performance and extends engine life across all Mitsubishi Eclipse model years.