The Nissan Versa sedan has been produced from 2007 to the present as a subcompact four-door sedan with small-displacement inline-4 gasoline engines. Using the correct engine oil capacity, type, and viscosity is essential for maintaining performance, efficiency, and engine life. This guide lists all Nissan Versa sedan model years with complete oil specifications and practical maintenance recommendations.
Quick Navigation
2025 Nissan Versa Sedan Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 1.6L I4 HR16DE gasoline |
| Oil Capacity (with Filter) | 4.9 qt (4.6 L) approximate |
| Oil Capacity (without Filter) | About 4.5 qt (4.3 L) approximate |
| Recommended Oil Type | Full synthetic |
| Viscosity | SAE 0W-20 (primary), SAE 5W-30 acceptable where specified |
| Oil Change Interval | Typically every 7,500 miles or 12 months under normal conditions |
| Oil Drain Plug Torque | Approx. 25–30 lb-ft (34–40 N·m) typical small Nissan engine range |
| Recommended Filters | Nissan OEM 15208-65F0E or equivalent (Mobil 1 M1-108A, Fram XG6607, WIX 51365) |
The 2025 Nissan Versa sedan uses the 1.6L HR16DE engine with an engine oil capacity of about 4.9 qt of full synthetic oil when the filter is replaced. Using SAE 0W-20 synthetic oil provides proper cold-flow characteristics and protection while supporting fuel efficiency and the recommended oil change interval.
2024 Nissan Versa Sedan Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 1.6L I4 HR16DE gasoline |
| Oil Capacity (with Filter) | 4.9 qt (4.6 L) approximate |
| Oil Capacity (without Filter) | About 4.5 qt (4.3 L) approximate |
| Recommended Oil Type | Full synthetic |
| Viscosity | SAE 0W-20 (primary), SAE 5W-30 acceptable where specified |
| Oil Change Interval | About every 7,500 miles or 12 months in normal service |
| Oil Drain Plug Torque | Approx. 25–30 lb-ft (34–40 N·m) typical |
| Recommended Filters | Nissan OEM 15208-65F0E or equivalent (Mobil 1 M1-108A, K&N HP-1010, Bosch 3300) |
The 2024 Nissan Versa sedan HR16DE engine typically requires about 4.9 quarts of 0W-20 full synthetic engine oil with a new oil filter. Using the specified synthetic oil and replacing the filter at each oil change helps maintain correct oil pressure, lubrication, and engine durability across the recommended mileage interval.
2023 Nissan Versa Sedan Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 1.6L I4 HR16DE gasoline |
| Oil Capacity (with Filter) | About 4.8–4.9 qt (4.5–4.6 L) approximate |
| Oil Capacity (without Filter) | About 4.4 qt (4.2 L) approximate |
| Recommended Oil Type | Full synthetic |
| Viscosity | SAE 0W-20 preferred, 5W-30 alternative where allowed |
| Oil Change Interval | Typically 5,000–7,500 miles depending on usage |
| Oil Drain Plug Torque | Approx. 25–30 lb-ft (34–40 N·m) |
| Recommended Filters | Nissan OEM 15208-65F0E; aftermarket Mobil 1 M1-108A, WIX 51365, Purolator PL14612 |
The 2023 Nissan Versa sedan HR16DE engine oil capacity is roughly 4.8–4.9 qt with a new filter using full synthetic oil. Choosing SAE 0W-20 synthetic oil supports proper viscosity control, stable film strength, and reliable lubrication in a wide range of operating temperatures.
2022 Nissan Versa Sedan Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 1.6L I4 HR16DE gasoline |
| Oil Capacity (with Filter) | About 4.8 qt (4.5–4.6 L) approximate |
| Oil Capacity (without Filter) | About 4.4 qt (4.2 L) approximate |
| Recommended Oil Type | Full synthetic |
| Viscosity | SAE 0W-20 (primary recommendation) |
| Oil Change Interval | 5,000–7,500 miles or 6–12 months depending on conditions |
| Oil Drain Plug Torque | Approx. 25–30 lb-ft (34–40 N·m) |
| Recommended Filters | Nissan OEM 15208-65F0E, or Mobil 1 M1-108A, K&N HP-1010 |
The 2022 Nissan Versa sedan engine oil capacity is about 4.8 qt with filter using SAE 0W-20 full synthetic oil for normal engine maintenance. This viscosity grade delivers good startup protection and stable lubrication, supporting the manufacturer’s oil change interval recommendations.
2021 Nissan Versa Sedan Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 1.6L I4 HR16DE gasoline |
| Oil Capacity (with Filter) | About 4.8 qt (4.5–4.6 L) approximate |
| Oil Capacity (without Filter) | About 4.4 qt (4.2 L) approximate |
| Recommended Oil Type | Full synthetic |
| Viscosity | SAE 0W-20 |
| Oil Change Interval | Around 5,000–7,500 miles based on driving style |
| Oil Drain Plug Torque | Approx. 25–30 lb-ft (34–40 N·m) |
| Recommended Filters | Nissan OEM 15208-65F0E; equivalents like WIX 51365, Fram XG6607 |
The 2021 Nissan Versa sedan specifies about 4.8 qt of 0W-20 full synthetic oil when replacing the oil filter. Keeping to the recommended viscosity and interval helps maintain engine cleanliness and reduces wear in the HR16DE engine.
2020 Nissan Versa Sedan Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 1.6L I4 HR16DE gasoline |
| Oil Capacity (with Filter) | About 4.8 qt (4.5–4.6 L) approximate |
| Oil Capacity (without Filter) | About 4.4 qt (4.2 L) approximate |
| Recommended Oil Type | Full synthetic |
| Viscosity | SAE 0W-20 |
| Oil Change Interval | Typically 5,000–7,500 miles or 6–12 months |
| Oil Drain Plug Torque | Approx. 25–30 lb-ft (34–40 N·m) |
| Recommended Filters | Nissan OEM 15208-65F0E, Mobil 1 M1-108A, Bosch 3300 |
The 2020 Nissan Versa sedan with the HR16DE engine generally takes about 4.8 qt of 0W-20 full synthetic oil with filter. Using synthetic oil of the correct viscosity helps support efficient operation and stable oil pressure over the full maintenance interval.
2019 Nissan Versa Sedan Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 1.6L I4 HR16DE gasoline |
| Oil Capacity (with Filter) | About 3.2–3.7 qt (3.0–3.5 L) typical small HR16DE application |
| Oil Capacity (without Filter) | About 3.0–3.3 qt (2.8–3.1 L) |
| Recommended Oil Type | Full synthetic or synthetic blend |
| Viscosity | SAE 5W-30 commonly specified; 0W-20 may be allowed in some markets |
| Oil Change Interval | About 5,000 miles or 6 months for many earlier HR16DE applications |
| Oil Drain Plug Torque | Approx. 25–30 lb-ft (34–40 N·m) |
| Recommended Filters | Nissan OEM 15208-65F0E; equivalents such as Fram XG6607, WIX 51365 |
The 2019 Nissan Versa sedan HR16DE engine typically uses around 3.2–3.7 qt of synthetic or synthetic blend oil depending on filter choice. SAE 5W-30 viscosity is commonly specified for this period, providing balanced protection and fuel economy for daily driving.
2018 Nissan Versa Sedan Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 1.6L I4 HR16DE gasoline |
| Oil Capacity (with Filter) | Around 3.2–3.7 qt (3.0–3.5 L) |
| Oil Capacity (without Filter) | About 3.0–3.3 qt (2.8–3.1 L) |
| Recommended Oil Type | Synthetic blend or full synthetic |
| Viscosity | SAE 5W-30 for most climates |
| Oil Change Interval | Typically 5,000 miles or 6 months on many schedules |
| Oil Drain Plug Torque | Approx. 25–30 lb-ft (34–40 N·m) |
| Recommended Filters | Nissan OEM 15208-65F0E; aftermarket M1-108A, PL14612, 51365 |
The 2018 Nissan Versa sedan with the HR16DE engine usually requires between 3.2 and 3.7 qt of SAE 5W-30 synthetic blend or full synthetic engine oil. Observing the recommended oil change interval and replacing the filter at each service keeps the lubrication system stable and clean.
2017 Nissan Versa Sedan Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 1.6L I4 HR16DE gasoline |
| Oil Capacity (with Filter) | 3.2 qt (3.0 L) listed for sedan in some specs |
| Oil Capacity (without Filter) | About 3.0 qt (2.8 L) |
| Recommended Oil Type | Synthetic blend or full synthetic |
| Viscosity | SAE 5W-30 commonly recommended |
| Oil Change Interval | About 5,000 miles or 6 months typical |
| Oil Drain Plug Torque | Approx. 25–30 lb-ft (34–40 N·m) |
| Recommended Filters | Nissan OEM 15208-65F0E; equivalents like WIX 51365, Fram XG6607 |
The 2017 Nissan Versa sedan HR16DE specification lists an engine oil capacity around 3.2 qt, so filling slowly and checking the dipstick is important. Using SAE 5W-30 synthetic blend oil maintains correct viscosity at operating temperature while protecting internal engine components.
2016 Nissan Versa Sedan Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 1.6L I4 HR16DE gasoline |
| Oil Capacity (with Filter) | About 3.2–3.7 qt (3.0–3.5 L) depending on filter used |
| Oil Capacity (without Filter) | About 3.0–3.3 qt (2.8–3.1 L) |
| Recommended Oil Type | Synthetic blend or full synthetic |
| Viscosity | SAE 5W-30 for most climates |
| Oil Change Interval | Approximately 5,000 miles or 6 months recommended by many service schedules |
| Oil Drain Plug Torque | Approx. 25–30 lb-ft (34–40 N·m) |
| Recommended Filters | Nissan OEM 15208-65F0E, Mobil 1 M1-108A, Purolator PL14612 |
The 2016 Nissan Versa sedan uses the HR16DE engine with an oil capacity typically in the low 3-qt range when the filter is replaced. A quality SAE 5W-30 synthetic blend or full synthetic oil provides reliable protection for commuting and mixed driving.
2015 Nissan Versa Sedan Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 1.6L I4 HR16DE gasoline |
| Oil Capacity (with Filter) | About 3.2–3.7 qt (3.0–3.5 L) |
| Oil Capacity (without Filter) | About 3.0–3.3 qt (2.8–3.1 L) |
| Recommended Oil Type | Synthetic blend or full synthetic |
| Viscosity | SAE 5W-30 typical |
| Oil Change Interval | Around 5,000 miles or 6 months under normal use |
| Oil Drain Plug Torque | Approx. 25–30 lb-ft (34–40 N·m) |
| Recommended Filters | Nissan OEM 15208-65F0E; aftermarket XG6607, 51365, PL14612 |
The 2015 Nissan Versa sedan engine oil capacity stays in the 3.2–3.7 qt range with filter, depending on filter design and residual oil. Matching the specified SAE 5W-30 viscosity to ambient climate and driving conditions ensures proper film thickness and wear control.
2014 Nissan Versa Sedan Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 1.6L I4 HR16DE gasoline |
| Oil Capacity (with Filter) | About 3.2–3.7 qt (3.0–3.5 L) |
| Oil Capacity (without Filter) | About 3.0–3.3 qt (2.8–3.1 L) |
| Recommended Oil Type | Synthetic blend or full synthetic |
| Viscosity | SAE 5W-30 (some markets may allow 0W-20) |
| Oil Change Interval | About 5,000 miles or 6 months standard |
| Oil Drain Plug Torque | Approx. 25–30 lb-ft (34–40 N·m) |
| Recommended Filters | Nissan OEM 15208-65F0E; M1-108A, HP-1010, PL14612 |
The 2014 Nissan Versa sedan HR16DE engine typically needs just over 3 qt of synthetic blend or full synthetic oil when the oil filter is changed. Observing the specified viscosity and interval keeps the engine lubrication system stable over both city and highway operation.
2013 Nissan Versa Sedan Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 1.6L I4 HR16DE gasoline |
| Oil Capacity (with Filter) | About 3.2–3.7 qt (3.0–3.5 L) |
| Oil Capacity (without Filter) | About 3.0–3.3 qt (2.8–3.1 L) |
| Recommended Oil Type | Synthetic blend or full synthetic |
| Viscosity | SAE 5W-30 common recommendation |
| Oil Change Interval | About 5,000 miles or 6 months |
| Oil Drain Plug Torque | Approx. 25–30 lb-ft (34–40 N·m) |
| Recommended Filters | Nissan OEM 15208-65F0E; equivalents such as 51365, XG6607 |
The 2013 Nissan Versa sedan HR16DE uses roughly 3.2–3.7 qt of SAE 5W-30 oil with a new filter and proper draining. Synthetic blend or full synthetic formulations help manage deposits and maintain viscosity under repeated thermal cycles.
2012 Nissan Versa Sedan Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 1.6L I4 HR16DE gasoline (sedan); 1.8L I4 MR18DE commonly in hatch in some markets |
| Oil Capacity (with Filter) | HR16DE about 3.2–3.7 qt (3.0–3.5 L); MR18DE about 3.7–4.0 qt (3.5–3.8 L) typical |
| Oil Capacity (without Filter) | Slightly lower by 0.2–0.3 qt |
| Recommended Oil Type | Synthetic blend or full synthetic |
| Viscosity | SAE 5W-30 for most applications |
| Oil Change Interval | About 5,000 miles or 6 months |
| Oil Drain Plug Torque | Approx. 25–30 lb-ft (34–40 N·m) |
| Recommended Filters | Nissan OEM 15208-65F0E; aftermarket M1-110A or M1-108A depending on engine, PL14612 |
The 2012 Nissan Versa sedan mainly uses the 1.6L HR16DE engine with an engine oil capacity around the low 3-qt range with filter. Some configurations use the 1.8L MR18DE with slightly higher capacity, so verifying the engine code before service is important.
2011 Nissan Versa Sedan Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 1.6L I4 HR16DE or 1.8L I4 MR18DE depending on market |
| Oil Capacity (with Filter) | HR16DE about 3.2–3.7 qt; MR18DE about 3.7–4.0 qt typical |
| Oil Capacity (without Filter) | 0.2–0.3 qt less than with filter |
| Recommended Oil Type | Synthetic blend or full synthetic |
| Viscosity | SAE 5W-30 typical; some manuals may permit 10W-30 in warm climates |
| Oil Change Interval | About 5,000 miles or 6 months |
| Oil Drain Plug Torque | Approx. 25–30 lb-ft (34–40 N·m) |
| Recommended Filters | Nissan OEM 15208-65F0E; equivalents like M1-110A, 51356, XG7317 for MR18DE |
The 2011 Nissan Versa sedan engine oil capacity depends on whether it has the 1.6L or 1.8L engine, with both using SAE 5W-30 oil in most markets. Checking the dipstick after filling and running the engine briefly ensures the actual level matches the specification.
2010 Nissan Versa Sedan Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 1.6L I4 HR16DE or 1.8L I4 MR18DE |
| Oil Capacity (with Filter) | HR16DE about 3.2–3.7 qt; MR18DE about 3.7–4.0 qt typical |
| Oil Capacity (without Filter) | Slightly lower by 0.2–0.3 qt |
| Recommended Oil Type | Conventional or synthetic blend, upgrading to full synthetic acceptable |
| Viscosity | SAE 5W-30 typical recommendation |
| Oil Change Interval | Commonly 3,000–5,000 miles on older schedules |
| Oil Drain Plug Torque | Approx. 25–30 lb-ft (34–40 N·m) |
| Recommended Filters | Nissan OEM 15208-65F0E or 15208-9E000; M1-110A, PL14612 equivalents |
The 2010 Nissan Versa sedan uses around 3–4 qt of SAE 5W-30 engine oil depending on engine and filter configuration. Many owners choose synthetic oil for cleaner operation, even when conventional oil was originally specified.
2009 Nissan Versa Sedan Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 1.6L I4 HR16DE or 1.8L I4 MR18DE |
| Oil Capacity (with Filter) | Approximately 3.2–3.7 qt (HR16DE) or 3.7–4.0 qt (MR18DE) |
| Oil Capacity (without Filter) | 0.2–0.3 qt less |
| Recommended Oil Type | Conventional, synthetic blend, or full synthetic |
| Viscosity | SAE 5W-30 for most climates |
| Oil Change Interval | Often 3,000–5,000 miles depending on oil type and conditions |
| Oil Drain Plug Torque | Approx. 25–30 lb-ft (34–40 N·m) |
| Recommended Filters | Nissan OEM 15208-65F0E / 15208-9E000; common equivalents like M1-110A |
The 2009 Nissan Versa sedan engine oil capacity varies slightly by engine but stays in the 3–4 qt range with filter. Adopting synthetic oil and moderate intervals improves resistance to sludge and varnish in daily driving.
2008 Nissan Versa Sedan Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 1.6L I4 HR16DE or 1.8L I4 MR18DE |
| Oil Capacity (with Filter) | Around 3.2–3.7 qt (HR16DE) or 3.7–4.0 qt (MR18DE) |
| Oil Capacity (without Filter) | 0.2–0.3 qt less |
| Recommended Oil Type | Conventional or synthetic blend |
| Viscosity | SAE 5W-30 typical |
| Oil Change Interval | About 3,000–5,000 miles in many older recommendations |
| Oil Drain Plug Torque | Approx. 25–30 lb-ft (34–40 N·m) |
| Recommended Filters | Nissan OEM 15208-9E000; M1-110A, PL14612, 51356 |
The 2008 Nissan Versa sedan uses about 3–4 qt of 5W-30 engine oil depending on whether it has the 1.6L or 1.8L engine. Modern full synthetic oil can be used as an upgrade while keeping the same viscosity and service interval.
2007 Nissan Versa Sedan Engine Oil Capacity
| Specification | Detail |
|---|---|
| Engine | 1.8L I4 MR18DE (early North American Versa) |
| Oil Capacity (with Filter) | About 3.7–4.0 qt (3.5–3.8 L) typical |
| Oil Capacity (without Filter) | Around 3.4–3.7 qt (3.2–3.5 L) |
| Recommended Oil Type | Conventional or synthetic blend; full synthetic optional |
| Viscosity | SAE 5W-30 in most owner’s manuals |
| Oil Change Interval | Typically 3,000–5,000 miles or 3–6 months for early models |
| Oil Drain Plug Torque | Approx. 25–30 lb-ft (34–40 N·m) |
| Recommended Filters | Nissan OEM 15208-9E000; equivalents M1-110A, XG7317, 51356 |
The 2007 Nissan Versa sedan MR18DE engine generally takes just under 4 qt of SAE 5W-30 motor oil with a replacement filter. Using a quality filter and observing shorter intervals is beneficial on older engines, particularly in severe driving conditions.
Oil Maintenance & Service Tips
Proper engine oil maintenance on the Nissan Versa sedan involves regular level checks, correct oil type selection, and consistent oil filter replacement. Checking the oil level on level ground with a cold or fully settled engine ensures the reading reflects the true engine oil capacity and prevents overfilling.
Using synthetic oil or synthetic blend matching the specified viscosity, such as SAE 0W-20 or 5W-30, supports stable oil pressure, low-temperature starting, and effective wear protection across the recommended maintenance interval. Replacing the oil filter at every change and applying the correct oil drain plug torque helps avoid leaks, thread damage, and lubrication issues over long-term operation.
Normal vs Severe Driving Conditions
| Condition Type | Typical Oil Change Interval | Notes |
|---|---|---|
| Normal Driving | About 7,500 miles or 12 months on newer HR16DE models with synthetic oil | Mix of city and highway use with moderate temperatures and light loads. |
| Severe Driving | About 3,000–5,000 miles or 3–6 months depending on generation | Frequent short trips, extreme temperatures, heavy traffic, or towing increase oil stress. |
Adapting the oil change interval to actual driving conditions keeps the oil from thickening with oxidation or thinning due to fuel dilution, both of which can reduce engine protection.
When exploring Nissan, don’t miss our detailed guides on popular models like the Nissan Kicks, Nissan Versa Note, Nissan Quest, and Nissan Xterra. Understanding engine oil capacity is crucial for proper maintenance, and our expert resources explain the exact oil requirements for these models. You’ll also find insights on recommended oil types, service intervals, and common issues linked to incorrect oil levels, ensuring your Nissan always delivers reliable performance.
FAQs
What kind of oil does a Nissan Versa sedan use?
Most Nissan Versa sedan models with the 1.6L HR16DE engine use full synthetic or synthetic blend oil in viscosity grades of SAE 0W-20 on newer models and SAE 5W-30 on earlier generations. Some older MR18DE-equipped sedans were originally specified with conventional 5W-30, but upgrading to a full synthetic of the same viscosity is generally acceptable and improves high-temperature stability.
How much oil does a Nissan Versa sedan take?
Newer Nissan Versa sedans with the 1.6L HR16DE engine typically require about 4.8–4.9 qt with a new filter, while earlier HR16DE models use around 3.2–3.7 qt. Older 1.8L MR18DE engines generally take about 3.7–4.0 qt of oil with filter, so actual capacity depends on the specific engine and model year.
What is the recommended oil type and viscosity for the Nissan Versa sedan?
The recommended oil type for most late-model Versa sedans is full synthetic oil meeting current API gasoline engine standards. The viscosity is usually SAE 0W-20 on newer HR16DE applications and SAE 5W-30 on earlier HR16DE and MR18DE engines, though some manuals may list alternative viscosities for specific temperature ranges.
What is the oil change interval for a Nissan Versa sedan?
For newer Nissan Versa sedans using synthetic oil, many maintenance schedules specify an oil change interval around 7,500 miles or 12 months under normal driving conditions. Under severe conditions, such as stop-and-go traffic, short trips, or extreme temperatures, shortening the interval to 3,000–5,000 miles or 3–6 months helps maintain engine protection.
Do I need to replace the oil filter every time on a Nissan Versa sedan?
Replacing the oil filter at every oil change is strongly recommended, because the filter traps contaminants and helps maintain clean oil and correct flow. Using an OEM filter or a quality equivalent that matches the correct thread, gasket size, and bypass valve specification prevents leaks and ensures the lubrication system functions as designed.
What torque should I use on the Nissan Versa sedan oil drain plug?
The oil drain plug torque on small Nissan four-cylinder engines such as the HR16DE and MR18DE is typically in the 25–30 lb-ft (34–40 N·m) range. Using a torque wrench and a new crush washer where specified prevents overtightening, thread damage, or seepage at the oil pan sealing surface.
Conclusion
Across all model years, the Nissan Versa sedan engine oil capacity ranges from roughly 3.2–3.7 qt on earlier HR16DE cars up to about 4.8–4.9 qt on newer models, with MR18DE engines typically using just under 4 qt. Correct oil viscosity, such as SAE 0W-20 on recent models and SAE 5W-30 on older engines, combined with full synthetic or synthetic blend oil, ensures proper lubrication, efficiency, and durability.
Using manufacturer-approved oil and filters, observing the appropriate oil change interval, and following specified torque values for the drain plug are critical parts of engine maintenance that support long-term reliability and consistent performance for the Nissan Versa sedan.
